The all-in cost of Stacker/Reclaimers, line by line
Buyers who finance Stacker/Reclaimers rarely fund just the equipment. The actual loan principal is the bundle of items the lender wires to the seller, and that bundle is bigger than the spec sheet implies. The list below covers what shows up on the funding statement.
Base equipment. The unit itself, in the configuration the seller is offering.
For Stacker/Reclaimers, base pricing typically runs $8.5M to $11.9M , with the higher end reflecting software, control, and integration packages rather than the base unit alone.
Attachments, options, and add-ons.
Buyer-selected items show up on the invoice as separate lines. These are financeable in nearly every case. The decision is whether to roll them into the loan principal or pay them out of pocket at delivery.
Delivery, setup, and training.
For equipment that ships from a distant dealer to a remote job site, delivery and rigging can add 2 to 5 percent of base price. On Stacker/Reclaimers specifically, mobilization to the work site after delivery is the buyer responsibility unless negotiated otherwise.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Service and software-maintenance contracts on this class of equipment commonly run 8 to 18 percent of base price annually. Bundling the first year into the loan is standard. Bundling multiple years into the loan converts a recurring expense into a financed asset, with the same trade-off as financing any other soft cost.
Buyer mix on Stacker/Reclaimers financing applications
Across the volume we fund on Stacker/Reclaimers, four buyer profiles cover most applications. The framing of each profile drives the application narrative. Same equipment, same price, different profile, different rate; the variance is real and worth understanding before you apply.
The growing operator
A two-year-old business with two existing units and a third on order to chase the next contract. We see this profile most often in trades, fleet, and field services. Lenders weigh the equipment as collateral, then look at revenue trajectory and time in business. Most growing operators qualify for standard programs at fair-to-good credit.
The non-profit buyer
A 501(c)(3) or government-affiliated entity buying equipment for mission delivery. We run a dedicated non-profit program with different rate and term structures from our standard book. Tax-exempt status changes some of the conventional financing math.
The first-time owner
An owner-operator who has been working for a previous employer or as a contractor and is now buying the equipment to run their own book. Programs exist for this profile but expect 10 to 20 percent down, personal guarantees, and proof of relevant work history.
The capacity-doubling buyer
An operator adding a second shift, a second line, or duplicate equipment to meet existing demand. Cleanest story to approve because the demand is already documented in the historical revenue. Loan term often matches the equipment useful life rather than being shortened against perceived risk.
How lenders evaluate a Stacker/Reclaimers application
Application review on Stacker/Reclaimers financing weights the borrower side first and the equipment side second. The borrower factors below carry the most influence on rate, term, and down payment. Knowing how each maps to your specific situation lets you put the application together so the strong parts stand out.
- Owner background and depth. Years of related industry experience, prior ownership of similar equipment, and any documented success operating the asset class affect review. New entrants to a class price differently from established operators expanding within their lane.
- Bank statement analysis. Three to twelve months of business bank statements. Lenders look at average daily balance, monthly deposit count, NSF activity, and overall cash flow stability. This is where seasonal businesses get fairly priced if they have the records.
- Business credit profile. D&B Paydex, Experian Intelliscore, and trade references from current vendors. Stronger business credit reduces personal-guarantee scope and improves the rate.
- Personal credit of principals. For owners with 20 percent or more equity, personal FICO drives both the available program and the rate. The pull is soft at prequalification, hard at formal application with the chosen lender.
- Use of equipment. Will the asset generate revenue immediately, will it replace an existing producing asset, or is it additive capacity. Revenue-replacement deals close most easily.
What to confirm before signing on Stacker/Reclaimers
We fund based on what is on the bill of sale. The bill of sale is the seller representation, signed off by the buyer at delivery. Catching gaps between what was represented and what was delivered is a buyer responsibility. The items below are the ones we see signed past most often.
- Hours-meter or odometer history. Beyond the current reading, confirm the historical pattern of use. A unit with 4,000 hours from regular daily use is different from a unit with 4,000 hours from intermittent project work. Service records, when available, document the use pattern.
- Recall and campaign status. Manufacturer recalls and service campaigns sometimes go uncompleted on used equipment. Verify outstanding recalls before purchase; some are mandatory and prevent the equipment from being registered or operated in certain jurisdictions until completed.
- Electrical and instrument cluster. All gauges working, all warning lights cycling correctly on key-on, no fault codes stored in the ECU. Modern equipment with electronic controls is expensive to diagnose if anything is wrong.
- Delivery and acceptance terms. Who pays for delivery, what condition the unit must be in at delivery, and what the buyer accepts. The funding documents will reference the delivery and acceptance certificate, which the lender uses to release payment to the seller.
- Inspection by independent third party. For used equipment over $50,000, an independent mechanical inspection runs $300 to $800 and surfaces issues a walk-around will not catch. Lenders often require this for used equipment above a threshold.
- Hydraulics and ancillary systems. Full range of motion on every hydraulic function, no leaks, smooth operation, no chatter or pump whine. Hydraulic repairs on heavy equipment run into five figures fast.
The post-funding issues we see most on Stacker/Reclaimers
The patterns below are not unique to Stacker/Reclaimers. They are the standard places where equipment finance transactions surprise the borrower post-funding. Each is preventable at the application or document-review stage.
Acceptance-letter timing
We fund against your signed acceptance of the equipment. If the equipment arrives missing items, damaged, or not matching the bill of sale, do not sign the acceptance until the seller addresses the issue. Once acceptance is signed, the seller is funded and your leverage to resolve is dramatically reduced.
ACH authorization scope
The funding documents authorize the lender to ACH debit your account for monthly payments. Some authorizations are limited to the regular monthly payment; others give the lender authority to debit late fees, NSF fees, or other charges. Read the ACH authorization clause and limit it where you can.
Down payment timing
Your down payment is typically due at funding, not application. Lenders verify the source of down payment funds for transactions above certain thresholds. Wiring down payment money from a personal account into the business account immediately before funding can flag the deal for additional documentation.
Pre-payment penalties
Equipment loans often carry pre-payment penalties for the first 12 to 36 months of the term. Standard structures range from 3 percent of the payoff in year one declining to zero by year three, to a flat fee of $500 to $2,000. If you expect to refinance or pay the loan off early, understand the penalty math before signing.
Quick answer
Stacker/Reclaimers financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
Quick answers
Direct answers to the questions we hear most on stacker/reclaimers applications. Each answer is one we have given to a real buyer in the last quarter.
Do I need business credit to finance equipment?
No, personal credit is typically the primary factor for small and mid-size businesses. Business credit (D&B PAYDEX, Equifax Business, Experian Business) matters more on larger transactions and for established businesses. Building business credit over time supports better terms on subsequent deals.
Can I add attachments to an existing equipment loan?
Sometimes, depending on the program tier and the original loan structure. Adding to an existing loan typically requires a loan modification or amendment. More commonly, attachments finance as a separate transaction at standard equipment terms, sometimes at a modest premium over the original equipment rate.
What is an app-only program?
App-only means we approve the deal based on a credit application without requiring full business financials. Typically capped at $150,000 to $250,000 transaction size depending on the program tier. Decisions are faster (often same-day) and documentation is minimal. Above the app-only threshold, full financials are required.
EFA vs loan, which is better?
They function identically for tax and ownership purposes. EFA documentation is slightly simpler and faster to close on app-only programs. Loan documentation is more traditional. The rate and structure are typically equivalent. EFA is more common in modern equipment finance, loan structure is more common in bank-originated deals.
What is the typical APR on equipment financing?
Standard prime credit equipment financing runs 7 to 11 percent APR depending on equipment type, term length, and lender. Mid-tier credit runs 9 to 13 percent. Specialty programs for credit-challenged or startup borrowers run 12 to 18 percent. Manufacturer captive promotional financing can run 0 to 6 percent.
Can I pay off my equipment loan early?
Yes, but many equipment loans carry pre-payment penalties in the first 12 to 36 months. Standard structures range from 3 percent of the payoff in year one declining to zero by year three. Some loans are open pre-payment with no penalty. Read the contract before signing if early payoff is likely.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a stacker/reclaimers deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- Installation and commissioning. Site preparation, electrical, plumbing, leveling, calibration, and operational commissioning. Runs 5 to 25 percent of equipment price depending on equipment category.
- Equipment purchase price. Base equipment price as quoted by the dealer. Negotiable, especially on used equipment and end-of-quarter new equipment.
- Extended warranty or service contract. Optional but common. Annual cost runs 5 to 15 percent of equipment price on production equipment, 1 to 3 percent on commercial vehicles. Financeable with the equipment.
- Insurance premiums. Commercial equipment insurance with lender named as loss payee. Annual premiums run 1 to 5 percent of equipment value depending on coverage and equipment category.
- Tooling and accessories. Cutting tools, attachments, fixtures, and accessories specific to the equipment. Often quoted separately from base equipment. Can run 10 to 40 percent of equipment cost.
- Title transfer and registration. Titled equipment (trucks, trailers, some construction equipment) requires title transfer and registration. State-specific fees from $50 to $500+.
- Software licenses. CAM, design, control, and operational software. Often subscription-based with annual renewal. Can run $5,000 to $50,000+ per seat depending on equipment category.
- Operator training. Manufacturer-provided or third-party operator training. Runs $1,500 to $25,000 depending on equipment complexity. OSHA-compliant training required on many categories.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Equipment becomes obsolete or no longer useful
Sell the equipment with lender consent (UCC release coordination), apply proceeds to loan payoff. If sale proceeds are below payoff, the deficiency becomes owed. Voluntary surrender to lender is sometimes available as an alternative.
Personal guarantee called on default
Personal guarantee makes the principal personally liable for the debt if the business defaults. Working with us on workout or restructure is the preferable path. Personal bankruptcy is a real consequence of unresolved default with personal guarantee.
Equipment lease ending with no clear plan
Lease structures require purchase, return, or renewal at end of term, typically with 60-90 day notice. Missing the notice deadline can trigger automatic renewal or fair-market-value buyout. Decide and communicate before the deadline.
Equipment used for something different from original purpose
Loan covenants sometimes restrict equipment use (no sub-rental, no out-of-state operation, etc.). Changing use materially without consent can trigger default. Request lender consent in writing before the change.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our internal financing book and the public industry resources below. We link out so you can verify any specific claim or go deeper.