What you actually finance when you buy continuous miners (ug)
Three quotes for the same continuous miners (ug) can come back with three different numbers, and the gap is rarely the equipment itself. The gap is what each dealer rolls in, what each lender treats as cost-of-deal, and what shows up as separate paper at funding. Knowing the line items in advance tells you what you are actually negotiating.
Base equipment. The unit itself, in the configuration the seller is offering.
For continuous miners (ug), base pricing typically runs $4.5M to $6.3M depending on configuration, year, hours, and condition.
Attachments, options, and add-ons.
Buyer-selected items show up on the invoice as separate lines. These are financeable in nearly every case. The decision is whether to roll them into the loan principal or pay them out of pocket at delivery.
Delivery, setup, and training.
For equipment that ships from a distant dealer to a remote job site, delivery and rigging can add 2 to 5 percent of base price. On continuous miners (ug) specifically, mobilization to the work site after delivery is the buyer responsibility unless negotiated otherwise.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Optional but common. Pricing typically runs $1,000 to $10,000 depending on equipment cost and coverage. Financeable. Decide whether to roll the warranty in before you sign the funding documents, not after.
The buyer profiles we see most on continuous miners (ug) deals
Equipment financing is more buyer-driven than the rate sheets imply. Two applications for the same continuous miners (ug) at the same price can land at meaningfully different rates because of where the buyer sits on the four profiles below. Knowing where you fit lets you frame the application to its strongest reading.
The expansion buyer
A business in growth mode, opening a second location or a second line, with revenue from the existing operation supporting the new debt. Lenders weigh the existing operation strength against the unproven contribution from the new unit; deals usually close on the strength of the existing book.
The first-time owner
An owner-operator who has been working for a previous employer or as a contractor and is now buying the equipment to run their own book. Programs exist for this profile but expect 10 to 20 percent down, personal guarantees, and proof of relevant work history.
The cash-rich buyer
A business that could pay cash but chooses to finance for tax benefit (Section 179 election with the financed equipment) or to preserve working capital for higher-return uses. These borrowers often look at $1 buyout structures because the tax treatment matches a purchase.
The post-restructure operator
A business that has been through a workout, settlement, or bankruptcy in the last 24 to 60 months. Programs exist with the right lender, usually at higher rate, with larger down payment, and tied to a personal guarantee from a principal with current clean credit.
The factors that move the rate on continuous miners (ug) financing
When our partner lenders evaluate continuous miners (ug), they price the borrower against five factors that have stable weights across the industry. The equipment itself is the easier part of the file. The borrower factors below are where the actual underwriting happens.
- Financial statement quality. For transactions above $250,000, lenders weight the quality of financial statements: are they CPA-prepared, are they current within 90 days, do they reconcile to bank statements. Strong financial reporting opens up better pricing on larger transactions.
- Equipment as collateral. The equipment itself secures the loan. Asset class, age, condition, configuration, and resale market depth all factor into how lenders advance against the cost.
- Geographic operating territory. Where the equipment will operate matters. Some lenders prefer single-state operation; others price interstate or cross-border use differently. The lender match changes if the equipment will operate outside the home state regularly.
- Existing debt service. Lenders look at total monthly debt obligations against cash flow. Adding a new payment that pushes the debt service coverage ratio below 1.20 typically requires additional support or a larger down payment.
- Business credit profile. D&B Paydex, Experian Intelliscore, and trade references from current vendors. Stronger business credit reduces personal-guarantee scope and improves the rate.
Before you sign on continuous miners (ug): what to verify
Lenders fund off the bill of sale and the seller representation. If the equipment shows up different from what is documented, the loan still funded and the discrepancy is yours to resolve. The walk below catches the issues before signing, when negotiation is still open and the cost of a fix is the seller side.
- Emissions compliance. For diesel-powered equipment, confirm the unit meets current emissions requirements for the state and operation it will be used in. Tier 4 final compliance, urea/DEF system status, and after-treatment health all affect both legality of use and resale value.
- Comparable sales data. Pricing checked against recent comparable sales from auction sites, dealer listings, and trade publications. A unit priced 15 percent above market signals either a premium configuration or a seller hoping the buyer does not check.
- Wear items documented. Tires, tracks, undercarriage, cutting edges, brakes. Photograph and note remaining life. These are the items that will need replacement first and that buyers under-budget for.
- Hour or mileage reading verified. Photographed at signing, recorded in writing on the bill of sale, and matched to the seller representation. Hours and miles are the single biggest driver of asset value at term-end.
- Title or MSO clean. Title for titled equipment, manufacturer statement of origin (MSO) for new equipment that has not been titled yet. Check for prior liens, salvage history, and that the seller is the title holder.
- Delivery and acceptance terms. Who pays for delivery, what condition the unit must be in at delivery, and what the buyer accepts. The funding documents will reference the delivery and acceptance certificate, which the lender uses to release payment to the seller.
The post-funding issues we see most on continuous miners (ug)
The patterns below are not unique to continuous miners (ug). They are the standard places where equipment finance transactions surprise the borrower post-funding. Each is preventable at the application or document-review stage.
Fleet vs single-unit pricing
When financing more than one unit, ask whether the lender treats it as a fleet transaction (often with better pricing) versus separate single-unit transactions. The difference can be 50 to 150 basis points on a multi-unit deal. Some lenders default to single-unit treatment unless the borrower asks for fleet structure.
Cross-collateral creep
Adding new equipment financing through the same lender often includes cross-collateral language that ties the new equipment to the prior loan and vice versa. Not always bad, but it limits flexibility if you need to sell or refinance one piece of equipment without paying off the other.
Title processing timeline
For titled equipment, the lender holds the original title and you operate under a temporary registration until the state DMV processes the title transfer. Timelines vary from two weeks to three months by state. If the equipment needs to be on the road immediately, ask the lender about expedited processing or temporary trip permits at the time of funding.
Pre-payment penalties
Equipment loans often carry pre-payment penalties for the first 12 to 36 months of the term. Standard structures range from 3 percent of the payoff in year one declining to zero by year three, to a flat fee of $500 to $2,000. If you expect to refinance or pay the loan off early, understand the penalty math before signing.
Quick answer
Continuous Miners (UG) financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
How we route the decision
The financing structure that fits depends on the actual situation. Below are the most common decision branches we walk through with buyers, in plain "if X, then Y" form.
- If You are buying used equipment over 7 years old
- Then Plan for shorter financing terms (36 to 48 months instead of 60 to 72) and higher rates. Authorized refurbished equipment from OEM-direct programs sometimes qualifies for new-equivalent terms.
- If You are planning a Section 179 election close to year-end
- Then Confirm placed-in-service date can be hit before December 31. Equipment ordered but not delivered/commissioned does not qualify for current-year §179, regardless of payment status.
- If You plan to keep the equipment past the financing term
- Then Use a loan or $1 buyout EFA structure. Operating lease and FMV lease structures cost more on a keep-past-term basis because of the residual buyout.
- If Your equipment is part of a larger build-out project
- Then Get bundled financing across the full project (equipment + infrastructure + integration) on single paper when possible. Bundled programs typically beat piecemeal financing on rate and approval probability.
- If You operate seasonally with revenue concentrated in specific months
- Then Ask for seasonal payment structures (skip payments in off-months, or ramped payments aligned to revenue). Many ag and landscape programs offer these at standard rates.
Timeline expectations
What actually happens day-by-day, from application to equipment in service. Most buyers underestimate one or two of these steps; knowing them up front prevents surprises.
Document signing to funding
1 to 3 business days
Lender operations team processes signed docs, files UCC, and funds the seller. Wire transfers funded same-day if processed before cutoff.
Lease end-of-term decision deadline
60 to 90 days before term end
Most lease structures require notice of intent (purchase, return, or renew) 60-90 days before term end. Missing the deadline can trigger automatic renewal or other default consequences.
Soft-pull pre-qualification turnaround
1 to 4 hours during business hours
Soft-pull pre-qualification surfaces lender matches and indicative rates within hours, without affecting credit score.
Title transfer on titled equipment
1 to 4 weeks
Title transfer through state DMV adds weeks to closing on titled equipment. Out-of-state transfers run on the longer end. Title escrow accelerates this in many cases.
Placed-in-service date documentation
Same-day as commissioning
For Section 179 and depreciation purposes, the placed-in-service date is when the equipment is delivered, installed, and operationally ready. Document this date carefully for tax purposes.
Full underwriting on complex deals
5 to 10 business days
Larger transactions ($500K+) or specialty deals (medical imaging, aerospace, mining) often require deeper underwriting. Plan funding date 2-3 weeks out for these.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a continuous miners (ug) deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- Operating consumables. Recurring costs not included in the equipment purchase: fuel, fluids, filters, tools, parts. Equipment-specific.
- Insurance premiums. Commercial equipment insurance with lender named as loss payee. Annual premiums run 1 to 5 percent of equipment value depending on coverage and equipment category.
- Title transfer and registration. Titled equipment (trucks, trailers, some construction equipment) requires title transfer and registration. State-specific fees from $50 to $500+.
- UCC-1 filing fees. $5 to $84 depending on state. Paid at filing; some lenders absorb, some pass to borrower.
- End-of-term residual or buyout. Lease structures: fair market value buyout at term end (FMV lease) or stated residual amount (TRAC lease). Loan/EFA structures: $1 buyout or no buyout. Plan for this from day one on lease structures.
- Delivery and freight. Equipment delivery from dealer to operating site. Runs 1 to 5 percent of equipment price on standard equipment, higher on heavy or oversized equipment requiring permits and escorts.
- Tooling and accessories. Cutting tools, attachments, fixtures, and accessories specific to the equipment. Often quoted separately from base equipment. Can run 10 to 40 percent of equipment cost.
- Pre-payment penalties. Standard early-payoff penalty: 3 percent of payoff in year one declining to zero by year three. Or flat fee of $500 to $2,000. Varies by lender.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our partner-lender book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
