Where the financed amount comes from on Underground Drill Rigs (Jumbo)
The funding statement on a Underground Drill Rigs (Jumbo) deal looks different from the dealer quote. The dealer quote highlights the equipment and configuration. The funding statement breaks out every dollar the lender is financing, in the order the lender lists them. Reading both side by side at signing is the discipline that prevents post-funding surprise.
Base equipment. The unit itself, in the configuration the seller is offering.
For Underground Drill Rigs (Jumbo), base pricing typically runs $1.5M to $2.1M depending on configuration, year, hours, and condition.
Attachments, options, and add-ons.
Buyer-selected items show up on the invoice as separate lines. These are financeable in nearly every case. The decision is whether to roll them into the loan principal or pay them out of pocket at delivery.
Delivery, setup, and training.
For equipment that ships from a distant dealer to a remote job site, delivery and rigging can add 2 to 5 percent of base price. On Underground Drill Rigs (Jumbo) specifically, mobilization to the work site after delivery is the buyer responsibility unless negotiated otherwise.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Optional but common. Pricing typically runs $1,000 to $10,000 depending on equipment cost and coverage. Financeable. Decide whether to roll the warranty in before you sign the funding documents, not after.
Buyer mix on Underground Drill Rigs (Jumbo) financing applications
Across the volume we fund on Underground Drill Rigs (Jumbo), four buyer profiles cover most applications. The framing of each profile drives the application narrative. Same equipment, same price, different profile, different rate; the variance is real and worth understanding before you apply.
The seasonal operator
A business with revenue that concentrates in certain months. We price seasonal risk by either requesting larger down payments, asking for proof of working capital reserves, or structuring seasonal payment skips that match the revenue pattern.
The growing operator
A two-year-old business with two existing units and a third on order to chase the next contract. We see this profile most often in trades, fleet, and field services. Lenders weigh the equipment as collateral, then look at revenue trajectory and time in business. Most growing operators qualify for standard programs at fair-to-good credit.
The non-profit buyer
A 501(c)(3) or government-affiliated entity buying equipment for mission delivery. We run a dedicated non-profit program with different rate and term structures from our standard book. Tax-exempt status changes some of the conventional financing math.
The acquisition buyer
A business buying an existing operation that includes equipment. We treat acquisition deals as either a business loan or straight equipment financing depending on the structure. The split matters for both rate and the documents we ask for.
The factors that move the rate on Underground Drill Rigs (Jumbo) financing
When we approve Underground Drill Rigs (Jumbo), we price the borrower against five factors that have stable weights across the industry. The equipment itself is the easier part of the file. The borrower factors below are where the actual financing review happens.
- Bank statement analysis. Three to twelve months of business bank statements. Lenders look at average daily balance, monthly deposit count, NSF activity, and overall cash flow stability. This is where seasonal businesses get fairly priced if they have the records.
- Personal credit of principals. For owners with 20 percent or more equity, personal FICO drives both the available program and the rate. The pull is soft at prequalification, hard at formal application with the chosen lender.
- Financial statement quality. For transactions above $250,000, lenders weight the quality of financial statements: are they CPA-prepared, are they current within 90 days, do they reconcile to bank statements. Strong financial reporting opens up better pricing on larger transactions.
- Equipment as collateral. The equipment itself secures the loan. Asset class, age, condition, configuration, and resale market depth all factor into how lenders advance against the cost.
- Geographic operating territory. Where the equipment will operate matters. We price interstate and cross-border equipment use differently than single-state operation. The program tier shifts if the equipment will operate outside the home state regularly.
Before you sign on Underground Drill Rigs (Jumbo): what to verify
Lenders fund off the bill of sale and the seller representation. If the equipment shows up different from what is documented, the loan still funded and the discrepancy is yours to resolve. The walk below catches the issues before signing, when negotiation is still open and the cost of a fix is the seller side.
- Service history complete. Maintenance records back to first owner where possible. Gaps in service history reduce both lender comfort and resale value.
- Hydraulics and ancillary systems. Full range of motion on every hydraulic function, no leaks, smooth operation, no chatter or pump whine. Hydraulic repairs on heavy equipment run into five figures fast.
- Wear items documented. Tires, tracks, undercarriage, cutting edges, brakes. Photograph and note remaining life. These are the items that will need replacement first and that buyers under-budget for.
- Operator manuals and documentation. Get the operator manual, service manual, and any parts catalog at the time of purchase. Replacements are sometimes available from the manufacturer but slow and expensive. Documentation is part of the asset value.
- Attachment compatibility. For machinery with attachments, confirm the attachments included are compatible with the base unit configuration (quick-coupler standards, hydraulic pressure ratings, mounting interfaces). Buying attachments that do not fit is a common surprise on used equipment with mixed-vintage components.
- Title or MSO clean. Title for titled equipment, manufacturer statement of origin (MSO) for new equipment that has not been titled yet. Check for prior liens, salvage history, and that the seller is the title holder.
Common pitfalls on Underground Drill Rigs (Jumbo) financing
The pitfalls below come from real loan files where a buyer signed paper they did not fully understand. None of these are dealer or lender fraud. They are gaps between what was assumed and what was documented. Catching them at the application stage costs nothing; catching them after funding costs real money.
Padded equipment invoice
Some dealers will list installation, delivery, or extended warranty as separate line items on the invoice and finance them into the loan. That is fine if you know it is happening and want those items rolled in. It becomes a problem when the borrower thinks they are financing the equipment at $100,000 and the actual loan principal is $112,500 because of soft-cost items added to the invoice.
Pre-payment penalties
Equipment loans often carry pre-payment penalties for the first 12 to 36 months of the term. Standard structures range from 3 percent of the payoff in year one declining to zero by year three, to a flat fee of $500 to $2,000. If you expect to refinance or pay the loan off early, understand the penalty math before signing.
Vendor financing disguised as direct
Some equipment dealers present vendor-arranged financing as the only path, when independent equipment lenders would beat the rate by 1 to 3 points for the same borrower. Always get at least one independent quote before accepting dealer financing on a transaction over $50,000.
ACH authorization scope
The funding documents authorize the lender to ACH debit your account for monthly payments. Some authorizations are limited to the regular monthly payment; others give the lender authority to debit late fees, NSF fees, or other charges. Read the ACH authorization clause and limit it where you can.
Quick answer
Underground Drill Rigs (Jumbo) financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
How we structure financing
The financing structure that fits depends on the actual situation. Below are the most common decision branches we walk through with buyers, in plain "if X, then Y" form.
- If Your equipment will be operated by a hired driver or operator
- Then Document the operator certification status in advance. Some lenders require proof of OSHA training, CDL, or industry-specific certification before funding on certain equipment categories.
- If You are buying equipment that will be sub-rented or leased to others
- Then Confirm at application. Sub-rental changes financing review analysis (revenue stability, asset risk) and may require a different program than owner-account use.
- If You will operate the equipment more than 50 percent for business
- Then You qualify for Section 179 and bonus depreciation on the business-use percentage. Below 50 percent business use disqualifies from §179 entirely.
- If You are taking a Section 179 election this tax year
- Then Use a loan or $1 buyout EFA. Operating lease structures do not qualify for §179 election. Confirm equipment placed in service before December 31.
- If You expect to pay the loan off within 12 months
- Then Check the pre-payment penalty before signing. Standard structures penalize early payoff in year one. Open pre-payment loans cost slightly more in stated rate but eliminate the penalty.
Timeline expectations
What actually happens day-by-day, from application to equipment in service. Most buyers underestimate one or two of these steps; knowing them up front prevents surprises.
Placed-in-service date documentation
Same-day as commissioning
For Section 179 and depreciation purposes, the placed-in-service date is when the equipment is delivered, installed, and operationally ready. Document this date carefully for tax purposes.
Decision to document signing
1 to 3 business days
Borrower review and signing of credit documents and personal guarantee. Most delays here are borrower-side rather than lender-side.
Lease end-of-term decision deadline
60 to 90 days before term end
Most lease structures require notice of intent (purchase, return, or renew) 60-90 days before term end. Missing the deadline can trigger automatic renewal or other default consequences.
Insurance binder issuance
Same-day to 24 hours
Commercial auto and equipment insurance binders typically issue same-day from existing carriers. New policies for new businesses can run 2-5 business days to bind.
Full financing review on complex deals
5 to 10 business days
Larger transactions ($500K+) or specialty deals (medical imaging, aerospace, mining) often require deeper review. Plan funding date 2-3 weeks out for these.
Application submission to decision
24 hours to 5 business days
App-only programs decision same-day or next-day. Full-financials programs run 3-5 business days as the file moves through credit, then operations.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a underground drill rigs (jumbo) deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- Tooling and accessories. Cutting tools, attachments, fixtures, and accessories specific to the equipment. Often quoted separately from base equipment. Can run 10 to 40 percent of equipment cost.
- UCC-1 filing fees. $5 to $84 depending on state. Paid at filing; some lenders absorb, some pass to borrower.
- Operator training. Manufacturer-provided or third-party operator training. Runs $1,500 to $25,000 depending on equipment complexity. OSHA-compliant training required on many categories.
- Installation and commissioning. Site preparation, electrical, plumbing, leveling, calibration, and operational commissioning. Runs 5 to 25 percent of equipment price depending on equipment category.
- Storage and security infrastructure. Indoor storage, security systems, and theft-prevention measures. Particularly important for landscape, construction, and small equipment frequently stored outdoors and at job sites.
- Title transfer and registration. Titled equipment (trucks, trailers, some construction equipment) requires title transfer and registration. State-specific fees from $50 to $500+.
- Pre-payment penalties. Standard early-payoff penalty: 3 percent of payoff in year one declining to zero by year three. Or flat fee of $500 to $2,000. Varies by lender.
- Extended warranty or service contract. Optional but common. Annual cost runs 5 to 15 percent of equipment price on production equipment, 1 to 3 percent on commercial vehicles. Financeable with the equipment.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our internal financing book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
