What you actually finance when you buy DEXA Scanners
Three quotes for the same DEXA Scanners can come back with three different numbers, and the gap is rarely the equipment itself. The gap is what each dealer rolls in, what each lender treats as cost-of-deal, and what shows up as separate paper at funding. Knowing the line items in advance tells you what you are actually negotiating.
Base equipment. The unit itself, in the configuration the seller is offering.
For DEXA Scanners, base pricing typically runs $95K to $133K depending on configuration, year, hours, and condition.
Two units of the same model can price differently based on software license tier, included consumables, and the service contract status at the time of sale.
Attachments, options, and add-ons.
Probe heads, software modules, additional licenses, and consumable starter packages appear as separate lines. Each is financeable. On medical imaging in particular, the software and license stack often costs as much as the base hardware.
Delivery, setup, and training.
Delivery, on-site installation, calibration, and operator training can run 3 to 8 percent of base price. For medical and high-touch indoor equipment, the manufacturer commonly sends a representative on site for commissioning. Negotiate the inclusion of this service into the base price rather than as a separate add-on.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Service and software-maintenance contracts on this class of equipment commonly run 8 to 18 percent of base price annually. Bundling the first year into the loan is standard. Bundling multiple years into the loan converts a recurring expense into a financed asset, with the same trade-off as financing any other soft cost.
Four DEXA Scanners borrowers we approve every week
The profile of the buyer matters as much as the equipment when our teams price a DEXA Scanners deal. The four profiles below cover roughly 80 percent of our applications. Each has a typical structure, a typical down payment expectation, and a typical program fit.
The growing operator
A two-year-old business with two existing units and a third on order to chase the next contract. We see this profile most often in trades, fleet, and field services. Lenders weigh the equipment as collateral, then look at revenue trajectory and time in business. Most growing operators qualify for standard programs at fair-to-good credit.
The contractor with a signed job
A buyer with an executed contract that the equipment will fulfill. We use the contract as supporting documentation, particularly for newer businesses. Expect to share the contract value, term, and counterparty.
The relocation buyer
A business moving operations to a new state or region and replacing equipment that does not move efficiently. Lenders see this fairly often in field services and construction. The application looks clean as long as the business operation continuity is documented.
The capacity-doubling buyer
An operator adding a second shift, a second line, or duplicate equipment to meet existing demand. Cleanest story to approve because the demand is already documented in the historical revenue. Loan term often matches the equipment useful life rather than being shortened against perceived risk.
The factors that move the rate on DEXA Scanners financing
When we approve DEXA Scanners, we price the borrower against five factors that have stable weights across the industry. The equipment itself is the easier part of the file. The borrower factors below are where the actual financing review happens.
- Documented backlog or pipeline. Signed contracts, outstanding purchase orders, or a documented work backlog support the application story. For service businesses in particular, a pipeline that justifies the new equipment closes deals faster than projections alone.
- Business credit profile. D&B Paydex, Experian Intelliscore, and trade references from current vendors. Stronger business credit reduces personal-guarantee scope and improves the rate.
- Time in business. The single most weighted factor for most equipment lenders. Two years in business opens up the full program menu. Under one year narrows the lender pool and often requires larger down payment.
- Existing debt service. Lenders look at total monthly debt obligations against cash flow. Adding a new payment that pushes the debt service coverage ratio below 1.20 typically requires additional support or a larger down payment.
- Geographic operating territory. Where the equipment will operate matters. We price interstate and cross-border equipment use differently than single-state operation. The program tier shifts if the equipment will operate outside the home state regularly.
What to confirm before signing on DEXA Scanners
We fund based on what is on the bill of sale. The bill of sale is the seller representation, signed off by the buyer at delivery. Catching gaps between what was represented and what was delivered is a buyer responsibility. The items below are the ones we see signed past most often.
- Pre-funding photo set. Take a complete photo set of the equipment at the time of purchase signing: serial number, hour meter, condition of major systems, attachments, and any documented damage. This photo set goes into your records and into the lender file if requested.
- Software and license transfer. For equipment with embedded software (modern control systems, telematics, diagnostic), confirm the software licenses transfer to the new owner. Some manufacturer software is tied to original-purchaser-only; the second-hand owner can lose access to telematics, fault-code reading, or update streams.
- Recall and campaign status. Manufacturer recalls and service campaigns sometimes go uncompleted on used equipment. Verify outstanding recalls before purchase; some are mandatory and prevent the equipment from being registered or operated in certain jurisdictions until completed.
- Comparable sales data. Pricing checked against recent comparable sales from auction sites, dealer listings, and trade publications. A unit priced 15 percent above market signals either a premium configuration or a seller hoping the buyer does not check.
- Manufacturer warranty status. On used equipment, confirm what is left of the original manufacturer warranty. Some warranties transfer with title and continue; others are tied to the original owner. The remaining warranty has dollar value and should factor into the purchase price.
- Inspection by independent third party. For used equipment over $50,000, an independent mechanical inspection runs $300 to $800 and surfaces issues a walk-around will not catch. Lenders often require this for used equipment above a threshold.
Where DEXA Scanners deals go sideways post-funding
Every one of the issues below is documented on the funding paperwork. The buyer signed off on each. The buyer surprise comes from the gap between what the dealer said in conversation and what the documents actually say. Read the documents at signing rather than after.
Operating lease end-of-term costs
FMV and TRAC leases include end-of-term obligations that surprise inexperienced lessees: excess wear and tear charges, return logistics, mileage or hour overages, and the fair market value buyout calculation itself. None of these are inherently bad, but knowing the rules at lease signing prevents end-of-term disputes.
Insurance lapse triggers
We require physical damage insurance on the financed equipment for the life of the loan, with us named as loss payee. If your policy lapses, we place force-placed insurance at three to five times the cost of an open-market policy and bill you for it. Keep proof of insurance current with us.
Padded equipment invoice
Some dealers will list installation, delivery, or extended warranty as separate line items on the invoice and finance them into the loan. That is fine if you know it is happening and want those items rolled in. It becomes a problem when the borrower thinks they are financing the equipment at $100,000 and the actual loan principal is $112,500 because of soft-cost items added to the invoice.
Add-on funding within the deal
During the application or document review stage, some borrowers add items (extended warranty, training, additional configuration) without realizing the loan amount is re-quoted at the higher figure. Each addition can change the rate, term, and approval terms. Confirm the final loan amount before signing rather than tracking changes piecemeal.
Quick answer
DEXA Scanners financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
Timeline expectations
What actually happens day-by-day, from application to equipment in service. Most buyers underestimate one or two of these steps; knowing them up front prevents surprises.
Insurance binder issuance
Same-day to 24 hours
Commercial auto and equipment insurance binders typically issue same-day from existing carriers. New policies for new businesses can run 2-5 business days to bind.
Document signing to funding
1 to 3 business days
Lender operations team processes signed docs, files UCC, and funds the seller. Wire transfers funded same-day if processed before cutoff.
Wire transfer cutoff times
Typically 2-3pm PT / 5-6pm ET
After cutoff, wire processes next business day. Late-Friday signings often delay funding until Monday or Tuesday.
Soft-pull pre-qualification turnaround
1 to 4 hours during business hours
Soft-pull pre-qualification surfaces program-tier matches and indicative rates within hours, without affecting credit score.
Lease end-of-term decision deadline
60 to 90 days before term end
Most lease structures require notice of intent (purchase, return, or renew) 60-90 days before term end. Missing the deadline can trigger automatic renewal or other default consequences.
Title transfer on titled equipment
1 to 4 weeks
Title transfer through state DMV adds weeks to closing on titled equipment. Out-of-state transfers run on the longer end. Title escrow accelerates this in many cases.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a dexa scanners deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- Pre-payment penalties. Standard early-payoff penalty: 3 percent of payoff in year one declining to zero by year three. Or flat fee of $500 to $2,000. Varies by lender.
- Documentation and dealer fees. Lender doc fee runs $150 to $1,500. Dealer doc fee varies. Both may roll into financed amount or pay at signing.
- Insurance premiums. Commercial equipment insurance with lender named as loss payee. Annual premiums run 1 to 5 percent of equipment value depending on coverage and equipment category.
- Installation and commissioning. Site preparation, electrical, plumbing, leveling, calibration, and operational commissioning. Runs 5 to 25 percent of equipment price depending on equipment category.
- Delivery and freight. Equipment delivery from dealer to operating site. Runs 1 to 5 percent of equipment price on standard equipment, higher on heavy or oversized equipment requiring permits and escorts.
- Sales or use tax. State and local sales tax on the equipment. Rolls into financed amount in most states. Manufacturing and qualifying exemptions reduce or eliminate this in many states.
- Tooling and accessories. Cutting tools, attachments, fixtures, and accessories specific to the equipment. Often quoted separately from base equipment. Can run 10 to 40 percent of equipment cost.
- Extended warranty or service contract. Optional but common. Annual cost runs 5 to 15 percent of equipment price on production equipment, 1 to 3 percent on commercial vehicles. Financeable with the equipment.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Personal guarantee called on default
Personal guarantee makes the principal personally liable for the debt if the business defaults. Working with us on workout or restructure is the preferable path. Personal bankruptcy is a real consequence of unresolved default with personal guarantee.
Lender becomes difficult to work with
Most equipment loans are assumable or assignable with lender consent. Refinancing to a different lender is the more common path. Document the issues clearly; the situation rarely improves and the alternatives exist.
Pre-payment penalty obstacles to refinancing
Calculate the breakeven: penalty cost vs. interest savings on refinanced rate. Common breakeven is 12-18 months. If you expect to keep the equipment 24+ more months at lower rate, the penalty usually pays back.
Equipment serial number does not match UCC filing
Identify the error (dealer substitution, lender filing error, etc.) and resolve before subsequent financing. The UCC needs to match the actual collateral for enforceability. Lender amendment of the UCC handles this in most cases.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our internal financing book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
