Where the financed amount comes from on c-arm (mobile fluoroscopy)
The funding statement on a c-arm (mobile fluoroscopy) deal looks different from the dealer quote. The dealer quote highlights the equipment and configuration. The funding statement breaks out every dollar the lender is financing, in the order the lender lists them. Reading both side by side at signing is the discipline that prevents post-funding surprise.
Base equipment. The unit itself, in the configuration the seller is offering.
For c-arm (mobile fluoroscopy), base pricing typically runs $145K to $203K depending on configuration, year, hours, and condition.
Two units of the same model can price differently based on software license tier, included consumables, and the service contract status at the time of sale.
Attachments, options, and add-ons.
Probe heads, software modules, additional licenses, and consumable starter packages appear as separate lines. Each is financeable. On medical imaging in particular, the software and license stack often costs as much as the base hardware.
Delivery, setup, and training.
Delivery, on-site installation, calibration, and operator training can run 3 to 8 percent of base price. For medical and high-touch indoor equipment, the manufacturer commonly sends a representative on site for commissioning. Negotiate the inclusion of this service into the base price rather than as a separate add-on.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Service and software-maintenance contracts on this class of equipment commonly run 8 to 18 percent of base price annually. Bundling the first year into the loan is standard. Bundling multiple years into the loan converts a recurring expense into a financed asset, with the same trade-off as financing any other soft cost.
The buyer profiles we see most on c-arm (mobile fluoroscopy) deals
Equipment financing is more buyer-driven than the rate sheets imply. Two applications for the same c-arm (mobile fluoroscopy) at the same price can land at meaningfully different rates because of where the buyer sits on the four profiles below. Knowing where you fit lets you frame the application to its strongest reading.
The post-restructure operator
A business that has been through a workout, settlement, or bankruptcy in the last 24 to 60 months. Programs exist with the right lender, usually at higher rate, with larger down payment, and tied to a personal guarantee from a principal with current clean credit.
The capacity-doubling buyer
An operator adding a second shift, a second line, or duplicate equipment to meet existing demand. Cleanest story to underwrite because the demand is already documented in the historical revenue. Loan term often matches the equipment useful life rather than being shortened against perceived risk.
The contractor adding owned equipment
A business that has historically rented adding equipment to its own book to reduce rental spend. Lenders look favorably on this story because the rental cost is documented and the math is transparent. The conversion from rent to own is one of the cleanest financing applications.
The upgrade buyer
A business trading out a working unit for a newer model with capabilities the current unit lacks. The story for lenders is fine, but the math (selling the old unit, paying off any remaining lien, redirecting the payment) needs to work cleanly before the new loan funds.
Inside the underwriter view of a c-arm (mobile fluoroscopy) deal
If you want to understand why two c-arm (mobile fluoroscopy) deals at identical price land at different rates, the answer is in the five borrower factors below. Lender pricing on the equipment side is reasonably standardized. Lender pricing on the borrower side has real spread.
- Financial statement quality. For transactions above $250,000, lenders weight the quality of financial statements: are they CPA-prepared, are they current within 90 days, do they reconcile to bank statements. Strong financial reporting opens up better pricing on larger transactions.
- Time in business. The single most weighted factor for most equipment lenders. Two years in business opens up the full program menu. Under one year narrows the lender pool and often requires larger down payment.
- Bank statement analysis. Three to twelve months of business bank statements. Lenders look at average daily balance, monthly deposit count, NSF activity, and overall cash flow stability. This is where seasonal businesses get fairly priced if they have the records.
- Use of equipment. Will the asset generate revenue immediately, will it replace an existing producing asset, or is it additive capacity. Revenue-replacement deals close most easily.
- Equipment as collateral. The equipment itself secures the loan. Asset class, age, condition, configuration, and resale market depth all factor into how lenders advance against the cost.
Before you sign on c-arm (mobile fluoroscopy): what to verify
Lenders fund off the bill of sale and the seller representation. If the equipment shows up different from what is documented, the loan still funded and the discrepancy is yours to resolve. The walk below catches the issues before signing, when negotiation is still open and the cost of a fix is the seller side.
- Inspection by independent third party. For used equipment over $50,000, an independent mechanical inspection runs $300 to $800 and surfaces issues a walk-around will not catch. Lenders often require this for used equipment above a threshold.
- Operator manuals and documentation. Get the operator manual, service manual, and any parts catalog at the time of purchase. Replacements are sometimes available from the manufacturer but slow and expensive. Documentation is part of the asset value.
- Comparable sales data. Pricing checked against recent comparable sales from auction sites, dealer listings, and trade publications. A unit priced 15 percent above market signals either a premium configuration or a seller hoping the buyer does not check.
- Delivery and acceptance terms. Who pays for delivery, what condition the unit must be in at delivery, and what the buyer accepts. The funding documents will reference the delivery and acceptance certificate, which the lender uses to release payment to the seller.
- Hour or mileage reading verified. Photographed at signing, recorded in writing on the bill of sale, and matched to the seller representation. Hours and miles are the single biggest driver of asset value at term-end.
- Attachment compatibility. For machinery with attachments, confirm the attachments included are compatible with the base unit configuration (quick-coupler standards, hydraulic pressure ratings, mounting interfaces). Buying attachments that do not fit is a common surprise on used equipment with mixed-vintage components.
Patterns to watch for on c-arm (mobile fluoroscopy) documents
Borrowers who run into trouble on c-arm (mobile fluoroscopy) financing almost never do so because of fraud or bad faith. They do so because something in the funding documents was different from what was discussed in conversation. The patterns below are the most common spots where that gap shows up.
EFA versus loan documentation differences
An Equipment Finance Agreement looks like a lease to a casual reader but behaves like a loan. Buyers who do not understand the structure sometimes try to apply lease-specific tax treatment to an EFA, or vice versa. Read the structure on the front page of the funding documents and confirm with your CPA before electing tax treatment.
Late payment cascading fees
A 10-day late payment on an equipment loan typically triggers a late fee of 5 to 10 percent of the payment amount. Some contracts also trigger default interest, which jumps the rate by 4 to 6 points until the account cures. The dollar impact of a single missed payment can run into the hundreds.
Pre-payment penalties
Equipment loans often carry pre-payment penalties for the first 12 to 36 months of the term. Standard structures range from 3 percent of the payoff in year one declining to zero by year three, to a flat fee of $500 to $2,000. If you expect to refinance or pay the loan off early, understand the penalty math before signing.
Down payment timing
Your down payment is typically due at funding, not application. Lenders verify the source of down payment funds for transactions above certain thresholds. Wiring down payment money from a personal account into the business account immediately before funding can flag the deal for additional documentation.
Quick answer
C-Arm (Mobile Fluoroscopy) financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
Timeline expectations
What actually happens day-by-day, from application to equipment in service. Most buyers underestimate one or two of these steps; knowing them up front prevents surprises.
Document signing to funding
1 to 3 business days
Lender operations team processes signed docs, files UCC, and funds the seller. Wire transfers funded same-day if processed before cutoff.
Application submission to decision
24 hours to 5 business days
App-only programs decision same-day or next-day. Full-financials programs run 3-5 business days as the file moves through credit, then operations.
Placed-in-service date documentation
Same-day as commissioning
For Section 179 and depreciation purposes, the placed-in-service date is when the equipment is delivered, installed, and operationally ready. Document this date carefully for tax purposes.
Decision to document signing
1 to 3 business days
Borrower review and signing of credit documents and personal guarantee. Most delays here are borrower-side rather than lender-side.
Insurance binder issuance
Same-day to 24 hours
Commercial auto and equipment insurance binders typically issue same-day from existing carriers. New policies for new businesses can run 2-5 business days to bind.
CARB compliance verification (California)
1 to 5 business days
California off-road diesel equipment requires CARB compliance verification. The DOORS database lookup is same-day; full compliance certification for transferred equipment runs days.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a c-arm (mobile fluoroscopy) deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- Operating consumables. Recurring costs not included in the equipment purchase: fuel, fluids, filters, tools, parts. Equipment-specific.
- Tooling and accessories. Cutting tools, attachments, fixtures, and accessories specific to the equipment. Often quoted separately from base equipment. Can run 10 to 40 percent of equipment cost.
- Software licenses. CAM, design, control, and operational software. Often subscription-based with annual renewal. Can run $5,000 to $50,000+ per seat depending on equipment category.
- Pre-payment penalties. Standard early-payoff penalty: 3 percent of payoff in year one declining to zero by year three. Or flat fee of $500 to $2,000. Varies by lender.
- Operator training. Manufacturer-provided or third-party operator training. Runs $1,500 to $25,000 depending on equipment complexity. OSHA-compliant training required on many categories.
- Personal property tax (where applicable). Annual personal property tax assessed by counties in many states. Runs 0.5 to 3 percent of assessed value annually.
- Extended warranty or service contract. Optional but common. Annual cost runs 5 to 15 percent of equipment price on production equipment, 1 to 3 percent on commercial vehicles. Financeable with the equipment.
- UCC-1 filing fees. $5 to $84 depending on state. Paid at filing; some lenders absorb, some pass to borrower.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Lender becomes difficult to work with
Most equipment loans are assumable or assignable with lender consent. Refinancing to a different lender is the more common path. Document the issues clearly; the situation rarely improves and the alternatives exist.
Borrower discovers equipment was misrepresented at sale
The lender funded based on the bill of sale, not the equipment condition. Disputes between buyer and seller after funding are between those parties. The loan obligation continues regardless. Independent pre-purchase inspection prevents most of these situations.
Pre-payment penalty obstacles to refinancing
Calculate the breakeven: penalty cost vs. interest savings on refinanced rate. Common breakeven is 12-18 months. If you expect to keep the equipment 24+ more months at lower rate, the penalty usually pays back.
Equipment lien still showing after loan payoff
Lender is required to terminate the UCC-1 within a defined window after payoff (varies by state). If termination has not occurred, request a UCC termination statement from the lender. Borrower can sometimes file UCC termination directly if lender is unresponsive.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our partner-lender book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
