What you actually finance when you buy arthroscopy systems
Three quotes for the same arthroscopy systems can come back with three different numbers, and the gap is rarely the equipment itself. The gap is what each dealer rolls in, what each lender treats as cost-of-deal, and what shows up as separate paper at funding. Knowing the line items in advance tells you what you are actually negotiating.
Base equipment. The unit itself, in the configuration the seller is offering.
For arthroscopy systems, base pricing typically runs $195K to $273K depending on configuration, year, hours, and condition.
Two units of the same model can price differently based on software license tier, included consumables, and the service contract status at the time of sale.
Attachments, options, and add-ons.
Probe heads, software modules, additional licenses, and consumable starter packages appear as separate lines. Each is financeable. On medical imaging in particular, the software and license stack often costs as much as the base hardware.
Delivery, setup, and training.
Delivery, on-site installation, calibration, and operator training can run 3 to 8 percent of base price. For medical and high-touch indoor equipment, the manufacturer commonly sends a representative on site for commissioning. Negotiate the inclusion of this service into the base price rather than as a separate add-on.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Service and software-maintenance contracts on this class of equipment commonly run 8 to 18 percent of base price annually. Bundling the first year into the loan is standard. Bundling multiple years into the loan converts a recurring expense into a financed asset, with the same trade-off as financing any other soft cost.
Who actually finances arthroscopy systems
Our partner lenders see a wide range of buyer profiles on arthroscopy systems applications. The four below are the ones we route most often. Pricing, term, and down payment differ across them, but each profile has a viable path to financing if the application is structured correctly.
The diversification buyer
An established operator adding a new equipment class outside their core business (a trucking firm adding a tow truck, a landscaper adding paving equipment). The story to the lender hinges on related-experience and a plausible revenue path; expect questions about how the new asset will be put to use.
The succession buyer
A family member, key employee, or partner buying out an exiting owner and continuing the operation. The equipment may transfer as part of the deal or be re-financed at the buyer side. Lenders need clarity on which is happening before they price the transaction.
The cash-rich buyer
A business that could pay cash but chooses to finance for tax benefit (Section 179 election with the financed equipment) or to preserve working capital for higher-return uses. These borrowers often look at $1 buyout structures because the tax treatment matches a purchase.
The seasonal operator
A business with revenue that concentrates in certain months. Lenders price this risk by either requesting larger down payments, asking for proof of working capital reserves, or structuring seasonal payment skips that match the revenue pattern.
Inside the underwriter view of a arthroscopy systems deal
If you want to understand why two arthroscopy systems deals at identical price land at different rates, the answer is in the five borrower factors below. Lender pricing on the equipment side is reasonably standardized. Lender pricing on the borrower side has real spread.
- Bank statement analysis. Three to twelve months of business bank statements. Lenders look at average daily balance, monthly deposit count, NSF activity, and overall cash flow stability. This is where seasonal businesses get fairly priced if they have the records.
- Existing debt service. Lenders look at total monthly debt obligations against cash flow. Adding a new payment that pushes the debt service coverage ratio below 1.20 typically requires additional support or a larger down payment.
- Geographic operating territory. Where the equipment will operate matters. Some lenders prefer single-state operation; others price interstate or cross-border use differently. The lender match changes if the equipment will operate outside the home state regularly.
- Documented backlog or pipeline. Signed contracts, outstanding purchase orders, or a documented work backlog support the application story. For service businesses in particular, a pipeline that justifies the new equipment closes deals faster than projections alone.
- Business credit profile. D&B Paydex, Experian Intelliscore, and trade references from current vendors. Stronger business credit reduces personal-guarantee scope and improves the rate.
The arthroscopy systems pre-purchase walk
The dollars saved in equipment financing are made or lost at the pre-purchase walk, not in the rate negotiation. Saving 50 basis points on a $200,000 loan is real money; missing a $40,000 powertrain issue on the same unit is not recoverable. The walk-through items below cover what we have seen surface most often on funded deals that went sideways post-funding.
- Hours-meter or odometer history. Beyond the current reading, confirm the historical pattern of use. A unit with 4,000 hours from regular daily use is different from a unit with 4,000 hours from intermittent project work. Service records, when available, document the use pattern.
- Operator manuals and documentation. Get the operator manual, service manual, and any parts catalog at the time of purchase. Replacements are sometimes available from the manufacturer but slow and expensive. Documentation is part of the asset value.
- Comparable sales data. Pricing checked against recent comparable sales from auction sites, dealer listings, and trade publications. A unit priced 15 percent above market signals either a premium configuration or a seller hoping the buyer does not check.
- Delivery and acceptance terms. Who pays for delivery, what condition the unit must be in at delivery, and what the buyer accepts. The funding documents will reference the delivery and acceptance certificate, which the lender uses to release payment to the seller.
- Emissions compliance. For diesel-powered equipment, confirm the unit meets current emissions requirements for the state and operation it will be used in. Tier 4 final compliance, urea/DEF system status, and after-treatment health all affect both legality of use and resale value.
- Manufacturer warranty status. On used equipment, confirm what is left of the original manufacturer warranty. Some warranties transfer with title and continue; others are tied to the original owner. The remaining warranty has dollar value and should factor into the purchase price.
Where arthroscopy systems deals go sideways post-funding
Every one of the issues below is documented on the funding paperwork. The buyer signed off on each. The buyer surprise comes from the gap between what the dealer said in conversation and what the documents actually say. Read the documents at signing rather than after.
Insurance loss-payee language
The insurance policy must name the lender as loss payee for the full life of the loan. Verify the loss-payee language matches exactly what the lender requires (including their address and entity name). A mismatched loss payee often results in lender-placed insurance at three to five times open-market cost while the issue is resolved.
ACH authorization scope
The funding documents authorize the lender to ACH debit your account for monthly payments. Some authorizations are limited to the regular monthly payment; others give the lender authority to debit late fees, NSF fees, or other charges. Read the ACH authorization clause and limit it where you can.
Add-on funding within the deal
During the application or document review stage, some borrowers add items (extended warranty, training, additional configuration) without realizing the loan amount is re-quoted at the higher figure. Each addition can change the rate, term, and approval terms. Confirm the final loan amount before signing rather than tracking changes piecemeal.
Doc fee surprises
Lender documentation fees range from $150 on the low end to $1,500 or more on larger transactions. These are disclosed in the funding documents but easy to skim past. Ask up front what the doc fee is, and whether it is being added to the financed amount or paid out of pocket at funding.
Quick answer
Arthroscopy Systems financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
Quick answers
Direct answers to the questions we hear most on arthroscopy systems applications. Each answer is one we have given to a real buyer in the last quarter.
How fast can I get funded?
Standard equipment loans on app-only programs (under $150K typically) close in 24 to 72 hours from doc submission. Full-financials programs run 3 to 7 business days. Titled equipment with title transfer adds 1 to 4 weeks.
What is the minimum credit score for equipment financing?
There is no single minimum across the industry. Prime programs start at 720+. Mid-tier programs work down to 660. Specialty programs handle 580 to 640 with structured down payment and personal guarantee. Below 580 is rare but exists in narrow specialty programs.
What happens if I miss a payment?
A 10-day late payment typically triggers a late fee of 5 to 10 percent of the payment amount. Some contracts also trigger default interest, jumping the rate by 4 to 6 points until the account cures. Repeated late payments can trigger acceleration of the balance and equipment repossession.
Do I need a personal guarantee?
Most equipment loans for small and mid-size businesses require personal guarantee from the principals. Large established businesses with strong financials sometimes get non-recourse structures. Startup and credit-challenged applications always require personal guarantee, often with spouse co-sign.
Can I finance equipment under my LLC?
Yes, and most equipment financing is done through business entities (LLC, S-corp, C-corp). The principal personal guarantee makes the credit profile of the LLC owners relevant. Single-member LLCs underwrite similarly to sole proprietorships.
What is a UCC-1 filing?
A UCC-1 financing statement is a public record filed by the lender that establishes a security interest in the financed equipment. It is filed at the Secretary of State (or equivalent) and runs for 5 years. The UCC must be terminated when the loan is paid off, and the borrower is responsible for confirming termination.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a arthroscopy systems deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- Insurance premiums. Commercial equipment insurance with lender named as loss payee. Annual premiums run 1 to 5 percent of equipment value depending on coverage and equipment category.
- Tooling and accessories. Cutting tools, attachments, fixtures, and accessories specific to the equipment. Often quoted separately from base equipment. Can run 10 to 40 percent of equipment cost.
- Title transfer and registration. Titled equipment (trucks, trailers, some construction equipment) requires title transfer and registration. State-specific fees from $50 to $500+.
- Late payment fees and penalties. Late fees of 5 to 10 percent of payment if more than 10 days late. Default interest of 4 to 6 points may apply. Worth knowing before signing.
- Personal property tax (where applicable). Annual personal property tax assessed by counties in many states. Runs 0.5 to 3 percent of assessed value annually.
- Documentation and dealer fees. Lender doc fee runs $150 to $1,500. Dealer doc fee varies. Both may roll into financed amount or pay at signing.
- Operator training. Manufacturer-provided or third-party operator training. Runs $1,500 to $25,000 depending on equipment complexity. OSHA-compliant training required on many categories.
- Sales or use tax. State and local sales tax on the equipment. Rolls into financed amount in most states. Manufacturing and qualifying exemptions reduce or eliminate this in many states.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Equipment lien still showing after loan payoff
Lender is required to terminate the UCC-1 within a defined window after payoff (varies by state). If termination has not occurred, request a UCC termination statement from the lender. Borrower can sometimes file UCC termination directly if lender is unresponsive.
Equipment becomes obsolete or no longer useful
Sell the equipment with lender consent (UCC release coordination), apply proceeds to loan payoff. If sale proceeds are below payoff, the deficiency becomes owed. Voluntary surrender to lender is sometimes available as an alternative.
Pre-payment penalty obstacles to refinancing
Calculate the breakeven: penalty cost vs. interest savings on refinanced rate. Common breakeven is 12-18 months. If you expect to keep the equipment 24+ more months at lower rate, the penalty usually pays back.
Personal guarantee called on default
Personal guarantee makes the principal personally liable for the debt if the business defaults. Working with the lender on workout or restructure is the preferable path. Personal bankruptcy is a real consequence of unresolved default with personal guarantee.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our partner-lender book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
