Inside the AS/RS (Automated Storage) invoice: what gets rolled in
Most surprises in AS/RS (Automated Storage) financing trace back to the line items between the equipment quote and the funded amount. The lender is funding what is on the bill of sale plus a defined set of allowable additions. The buyer often signs without reading which additions are in or out.
Base equipment. The unit itself, in the configuration the seller is offering.
For AS/RS (Automated Storage), base pricing typically runs $1.5M to $2.1M , with the higher end reflecting software, control, and integration packages rather than the base unit alone.
Attachments, options, and add-ons.
Buyer-selected items show up on the invoice as separate lines. These are financeable in nearly every case. The decision is whether to roll them into the loan principal or pay them out of pocket at delivery.
Delivery, setup, and training.
Commissioning, software activation, control integration, and operator training can add 4 to 10 percent of base price. The training piece is the most commonly overlooked: a unit that arrives without trained operators sits idle until the manufacturer schedule allows.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Service and software-maintenance contracts on this class of equipment commonly run 8 to 18 percent of base price annually. Bundling the first year into the loan is standard. Bundling multiple years into the loan converts a recurring expense into a financed asset, with the same trade-off as financing any other soft cost.
Buyer mix on AS/RS (Automated Storage) financing applications
Across the volume we fund on AS/RS (Automated Storage), four buyer profiles cover most applications. The framing of each profile drives the application narrative. Same equipment, same price, different profile, different rate; the variance is real and worth understanding before you apply.
The non-profit buyer
A 501(c)(3) or government-affiliated entity buying equipment for mission delivery. We run a dedicated non-profit program with different rate and term structures from our standard book. Tax-exempt status changes some of the conventional financing math.
The cash-rich buyer
A business that could pay cash but chooses to finance for tax benefit (Section 179 election with the financed equipment) or to preserve working capital for higher-return uses. These borrowers often look at $1 buyout structures because the tax treatment matches a purchase.
The diversification buyer
An established operator adding a new equipment class outside their core business (a trucking firm adding a tow truck, a landscaper adding paving equipment). The application narrative hinges on related-experience and a plausible revenue path; expect us to ask how the new asset will be put to use.
The grant-leveraged buyer
A business with a grant award, set-aside, or rebate that covers part of the equipment cost. We fund the remainder. The grant documentation goes into the file at application; timing of the grant disbursement versus loan funding is the detail that determines structure.
Inside our team view of a AS/RS (Automated Storage) deal
If you want to understand why two AS/RS (Automated Storage) deals at identical price land at different rates, the answer is in the five borrower factors below. Lender pricing on the equipment side is reasonably standardized. Lender pricing on the borrower side has real spread.
- Use of equipment. Will the asset generate revenue immediately, will it replace an existing producing asset, or is it additive capacity. Revenue-replacement deals close most easily.
- Personal credit of principals. For owners with 20 percent or more equity, personal FICO drives both the available program and the rate. The pull is soft at prequalification, hard at formal application with the chosen lender.
- Financial statement quality. For transactions above $250,000, lenders weight the quality of financial statements: are they CPA-prepared, are they current within 90 days, do they reconcile to bank statements. Strong financial reporting opens up better pricing on larger transactions.
- Bank statement analysis. Three to twelve months of business bank statements. Lenders look at average daily balance, monthly deposit count, NSF activity, and overall cash flow stability. This is where seasonal businesses get fairly priced if they have the records.
- Time in business. The single most weighted factor for most equipment lenders. Two years in business opens up the full program menu. Under one year narrows the lender pool and often requires larger down payment.
What to confirm before signing on AS/RS (Automated Storage)
We fund based on what is on the bill of sale. The bill of sale is the seller representation, signed off by the buyer at delivery. Catching gaps between what was represented and what was delivered is a buyer responsibility. The items below are the ones we see signed past most often.
- Attachment compatibility. For machinery with attachments, confirm the attachments included are compatible with the base unit configuration (quick-coupler standards, hydraulic pressure ratings, mounting interfaces). Buying attachments that do not fit is a common surprise on used equipment with mixed-vintage components.
- Delivery and acceptance terms. Who pays for delivery, what condition the unit must be in at delivery, and what the buyer accepts. The funding documents will reference the delivery and acceptance certificate, which the lender uses to release payment to the seller.
- Hour or mileage reading verified. Photographed at signing, recorded in writing on the bill of sale, and matched to the seller representation. Hours and miles are the single biggest driver of asset value at term-end.
- Recall and campaign status. Manufacturer recalls and service campaigns sometimes go uncompleted on used equipment. Verify outstanding recalls before purchase; some are mandatory and prevent the equipment from being registered or operated in certain jurisdictions until completed.
- Hours-meter or odometer history. Beyond the current reading, confirm the historical pattern of use. A unit with 4,000 hours from regular daily use is different from a unit with 4,000 hours from intermittent project work. Service records, when available, document the use pattern.
- Comparable sales data. Pricing checked against recent comparable sales from auction sites, dealer listings, and trade publications. A unit priced 15 percent above market signals either a premium configuration or a seller hoping the buyer does not check.
Common pitfalls on AS/RS (Automated Storage) financing
The pitfalls below come from real loan files where a buyer signed paper they did not fully understand. None of these are dealer or lender fraud. They are gaps between what was assumed and what was documented. Catching them at the application stage costs nothing; catching them after funding costs real money.
Acceptance-letter timing
We fund against your signed acceptance of the equipment. If the equipment arrives missing items, damaged, or not matching the bill of sale, do not sign the acceptance until the seller addresses the issue. Once acceptance is signed, the seller is funded and your leverage to resolve is dramatically reduced.
Trade-in payoff timing
If your transaction includes a trade-in with an existing lien, the new lender pays off the trade-in lien as part of the funding. Verify the trade-in payoff amount the new lender uses matches the actual payoff from the prior lender (which can include accrued interest and fees through the funding date). A $500 to $2,000 gap is common if this is not reconciled.
Padded equipment invoice
Some dealers will list installation, delivery, or extended warranty as separate line items on the invoice and finance them into the loan. That is fine if you know it is happening and want those items rolled in. It becomes a problem when the borrower thinks they are financing the equipment at $100,000 and the actual loan principal is $112,500 because of soft-cost items added to the invoice.
Late payment cascading fees
A 10-day late payment on an equipment loan typically triggers a late fee of 5 to 10 percent of the payment amount. Some contracts also trigger default interest, which jumps the rate by 4 to 6 points until the account cures. The dollar impact of a single missed payment can run into the hundreds.
Quick answer
AS/RS (Automated Storage) financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
Timeline expectations
What actually happens day-by-day, from application to equipment in service. Most buyers underestimate one or two of these steps; knowing them up front prevents surprises.
Soft-pull pre-qualification turnaround
1 to 4 hours during business hours
Soft-pull pre-qualification surfaces program-tier matches and indicative rates within hours, without affecting credit score.
UCC-1 filing and search
Filing: same-day. Search: 1-2 business days
UCC-1 financing statement files electronically same-day in most states. Pre-funding UCC search to confirm no existing liens runs 1-2 business days.
CARB compliance verification (California)
1 to 5 business days
California off-road diesel equipment requires CARB compliance verification. The DOORS database lookup is same-day; full compliance certification for transferred equipment runs days.
Application submission to decision
24 hours to 5 business days
App-only programs decision same-day or next-day. Full-financials programs run 3-5 business days as the file moves through credit, then operations.
Decision to document signing
1 to 3 business days
Borrower review and signing of credit documents and personal guarantee. Most delays here are borrower-side rather than lender-side.
Wire transfer cutoff times
Typically 2-3pm PT / 5-6pm ET
After cutoff, wire processes next business day. Late-Friday signings often delay funding until Monday or Tuesday.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a as/rs (automated storage) deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- Tooling and accessories. Cutting tools, attachments, fixtures, and accessories specific to the equipment. Often quoted separately from base equipment. Can run 10 to 40 percent of equipment cost.
- End-of-term residual or buyout. Lease structures: fair market value buyout at term end (FMV lease) or stated residual amount (TRAC lease). Loan/EFA structures: $1 buyout or no buyout. Plan for this from day one on lease structures.
- Late payment fees and penalties. Late fees of 5 to 10 percent of payment if more than 10 days late. Default interest of 4 to 6 points may apply. Worth knowing before signing.
- Operating consumables. Recurring costs not included in the equipment purchase: fuel, fluids, filters, tools, parts. Equipment-specific.
- UCC-1 filing fees. $5 to $84 depending on state. Paid at filing; some lenders absorb, some pass to borrower.
- Title transfer and registration. Titled equipment (trucks, trailers, some construction equipment) requires title transfer and registration. State-specific fees from $50 to $500+.
- Storage and security infrastructure. Indoor storage, security systems, and theft-prevention measures. Particularly important for landscape, construction, and small equipment frequently stored outdoors and at job sites.
- Insurance premiums. Commercial equipment insurance with lender named as loss payee. Annual premiums run 1 to 5 percent of equipment value depending on coverage and equipment category.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Personal guarantee called on default
Personal guarantee makes the principal personally liable for the debt if the business defaults. Working with us on workout or restructure is the preferable path. Personal bankruptcy is a real consequence of unresolved default with personal guarantee.
Equipment lease ending with no clear plan
Lease structures require purchase, return, or renewal at end of term, typically with 60-90 day notice. Missing the notice deadline can trigger automatic renewal or fair-market-value buyout. Decide and communicate before the deadline.
Borrower discovers equipment was misrepresented at sale
We funded based on the bill of sale, not the equipment condition. Disputes between buyer and seller after funding are between those parties. The loan obligation continues regardless. Independent pre-purchase inspection prevents most of these situations.
Equipment damage during the loan term
Insurance proceeds pay off the loan balance or fund replacement equipment with lender consent. The loan does not cancel automatically with the equipment loss; coordination with lender is required.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our internal financing book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
