Where the financed amount comes from on roller conveyors
The funding statement on a roller conveyors deal looks different from the dealer quote. The dealer quote highlights the equipment and configuration. The funding statement breaks out every dollar the lender is financing, in the order the lender lists them. Reading both side by side at signing is the discipline that prevents post-funding surprise.
Base equipment. The unit itself, in the configuration the seller is offering.
For roller conveyors, base pricing typically runs $38K to $53K depending on configuration, year, hours, and condition.
Attachments, options, and add-ons.
Buyer-selected items show up on the invoice as separate lines. These are financeable in nearly every case. The decision is whether to roll them into the loan principal or pay them out of pocket at delivery.
Delivery, setup, and training.
Delivery and setup typically add 1 to 4 percent of base price; training, where the dealer or manufacturer sends a representative on site, runs $1,500 to $5,000. Both are financeable and both are negotiable.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Optional but common. Pricing typically runs $1,000 to $10,000 depending on equipment cost and coverage. Financeable. Decide whether to roll the warranty in before you sign the funding documents, not after.
Buyer mix on roller conveyors financing applications
Across the volume we route on roller conveyors, four buyer profiles cover most applications. The framing of each profile drives the application narrative. Same equipment, same price, different profile, different rate; the variance is real and worth understanding before you apply.
The upgrade buyer
A business trading out a working unit for a newer model with capabilities the current unit lacks. The story for lenders is fine, but the math (selling the old unit, paying off any remaining lien, redirecting the payment) needs to work cleanly before the new loan funds.
The growing operator
A two-year-old business with two existing units and a third on order to chase the next contract. We see this profile most often in trades, fleet, and field services. Lenders weigh the equipment as collateral, then look at revenue trajectory and time in business. Most growing operators qualify for standard programs at fair-to-good credit.
The contract-backed buyer
A business with a signed contract or purchase order requiring the equipment to fulfill. The contract supports the file for newer businesses; lenders sometimes structure the loan term to match the contract term. Counterparty quality matters here.
The post-restructure operator
A business that has been through a workout, settlement, or bankruptcy in the last 24 to 60 months. Programs exist with the right lender, usually at higher rate, with larger down payment, and tied to a personal guarantee from a principal with current clean credit.
The factors that move the rate on roller conveyors financing
When our partner lenders evaluate roller conveyors, they price the borrower against five factors that have stable weights across the industry. The equipment itself is the easier part of the file. The borrower factors below are where the actual underwriting happens.
- Existing debt service. Lenders look at total monthly debt obligations against cash flow. Adding a new payment that pushes the debt service coverage ratio below 1.20 typically requires additional support or a larger down payment.
- Owner background and depth. Years of related industry experience, prior ownership of similar equipment, and any documented success operating the asset class affect underwriting. New entrants to a class price differently from established operators expanding within their lane.
- Documented backlog or pipeline. Signed contracts, outstanding purchase orders, or a documented work backlog support the application story. For service businesses in particular, a pipeline that justifies the new equipment closes deals faster than projections alone.
- Financial statement quality. For transactions above $250,000, lenders weight the quality of financial statements: are they CPA-prepared, are they current within 90 days, do they reconcile to bank statements. Strong financial reporting opens up better pricing on larger transactions.
- Time in business. The single most weighted factor for most equipment lenders. Two years in business opens up the full program menu. Under one year narrows the lender pool and often requires larger down payment.
The roller conveyors pre-purchase walk
The dollars saved in equipment financing are made or lost at the pre-purchase walk, not in the rate negotiation. Saving 50 basis points on a $200,000 loan is real money; missing a $40,000 powertrain issue on the same unit is not recoverable. The walk-through items below cover what we have seen surface most often on funded deals that went sideways post-funding.
- Service history complete. Maintenance records back to first owner where possible. Gaps in service history reduce both lender comfort and resale value.
- Recall and campaign status. Manufacturer recalls and service campaigns sometimes go uncompleted on used equipment. Verify outstanding recalls before purchase; some are mandatory and prevent the equipment from being registered or operated in certain jurisdictions until completed.
- Software and license transfer. For equipment with embedded software (modern control systems, telematics, diagnostic), confirm the software licenses transfer to the new owner. Some manufacturer software is tied to original-purchaser-only; the second-hand owner can lose access to telematics, fault-code reading, or update streams.
- Title or MSO clean. Title for titled equipment, manufacturer statement of origin (MSO) for new equipment that has not been titled yet. Check for prior liens, salvage history, and that the seller is the title holder.
- Attachment compatibility. For machinery with attachments, confirm the attachments included are compatible with the base unit configuration (quick-coupler standards, hydraulic pressure ratings, mounting interfaces). Buying attachments that do not fit is a common surprise on used equipment with mixed-vintage components.
- Hour or mileage reading verified. Photographed at signing, recorded in writing on the bill of sale, and matched to the seller representation. Hours and miles are the single biggest driver of asset value at term-end.
Where roller conveyors deals go sideways post-funding
Every one of the issues below is documented on the funding paperwork. The buyer signed off on each. The buyer surprise comes from the gap between what the dealer said in conversation and what the documents actually say. Read the documents at signing rather than after.
Trade-in payoff timing
If your transaction includes a trade-in with an existing lien, the new lender pays off the trade-in lien as part of the funding. Verify the trade-in payoff amount the new lender uses matches the actual payoff from the prior lender (which can include accrued interest and fees through the funding date). A $500 to $2,000 gap is common if this is not reconciled.
Co-borrower vs guarantor distinction
Some lenders require a co-borrower on the loan rather than a guarantor. The legal and tax implications differ materially. A co-borrower has direct payment obligation; a guarantor only steps in if the primary defaults. Make sure your funding documents reflect the role you intended to play, especially if multiple owners are involved.
Cross-collateral creep
Adding new equipment financing through the same lender often includes cross-collateral language that ties the new equipment to the prior loan and vice versa. Not always bad, but it limits flexibility if you need to sell or refinance one piece of equipment without paying off the other.
Personal guarantee scope
On most equipment loans under $250,000, owners with 20 percent or more equity sign personal guarantees. Read the guarantee language. Some guarantees are limited to the specific loan; others are continuing and cover any future borrowing from the same lender. Limit the guarantee to the specific transaction when possible.
Quick answer
Roller Conveyors financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
Quick answers
Direct answers to the questions we hear most on roller conveyors applications. Each answer is one we have given to a real buyer in the last quarter.
Is leasing better than buying equipment?
It depends on hold period and tax position. If you plan to keep the equipment past the financing term, loan or $1 buyout EFA typically wins. If you plan to cycle every 36 to 48 months, true lease structures often win. Section 179 election generally requires loan or EFA, not true operating lease.
What is an app-only program?
App-only means the lender approves the deal based on a credit application without requiring full business financials. Typically capped at $150,000 to $250,000 transaction size depending on lender. Decisions are faster (often same-day) and documentation is minimal. Above the app-only threshold, full financials are required.
Is equipment financing tax deductible?
The interest portion of equipment loan payments is deductible as a business expense. The equipment itself qualifies for depreciation or Section 179 immediate expensing if eligible. Lease payments on true operating leases deduct fully as business expense. Capital lease structures (EFA $1 buyout) get depreciation treatment.
Can I finance equipment under my LLC?
Yes, and most equipment financing is done through business entities (LLC, S-corp, C-corp). The principal personal guarantee makes the credit profile of the LLC owners relevant. Single-member LLCs underwrite similarly to sole proprietorships.
What is a TRAC lease?
A Terminal Rental Adjustment Clause (TRAC) lease is a structure used primarily on titled vehicles (trucks, trailers, certain heavy equipment) where the lessee bears the residual risk at end of term. Common on commercial vehicles because it offers operating-lease tax treatment with the buyer keeping equipment-purchase economics.
What is the minimum credit score for equipment financing?
There is no single minimum across the industry. Prime programs start at 720+. Mid-tier programs work down to 660. Specialty programs handle 580 to 640 with structured down payment and personal guarantee. Below 580 is rare but exists in narrow specialty programs.
How we route the decision
The financing structure that fits depends on the actual situation. Below are the most common decision branches we walk through with buyers, in plain "if X, then Y" form.
- If You expect rate environment to improve in the next 12 to 18 months
- Then Consider open pre-payment structures or a shorter term you can refinance later. The trade-off is the upfront cost; the refinance option becomes valuable if rates drop 100+ basis points.
- If You operate seasonally with revenue concentrated in specific months
- Then Ask for seasonal payment structures (skip payments in off-months, or ramped payments aligned to revenue). Many ag and landscape programs offer these at standard rates.
- If You are a startup with strong principal credit and industry experience
- Then Apply to startup-specific programs that recognize principal credit and experience as substitutes for entity history. Expect higher down payment but a real path to approval.
- If You plan to keep the equipment past the financing term
- Then Use a loan or $1 buyout EFA structure. Operating lease and FMV lease structures cost more on a keep-past-term basis because of the residual buyout.
- If Your business operates across multiple states
- Then Confirm where to file the UCC-1 (state of incorporation vs state of equipment location). Standard practice files in state of incorporation; check with counsel on edge cases.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Equipment used for something different from original purpose
Loan covenants sometimes restrict equipment use (no sub-rental, no out-of-state operation, etc.). Changing use materially without consent can trigger default. Request lender consent in writing before the change.
Personal guarantee called on default
Personal guarantee makes the principal personally liable for the debt if the business defaults. Working with the lender on workout or restructure is the preferable path. Personal bankruptcy is a real consequence of unresolved default with personal guarantee.
Equipment serial number does not match UCC filing
Identify the error (dealer substitution, lender filing error, etc.) and resolve before subsequent financing. The UCC needs to match the actual collateral for enforceability. Lender amendment of the UCC handles this in most cases.
Borrower cash flow stress mid-term
Contact the lender BEFORE missing a payment. Most lenders work with borrowers in temporary stress through extension, deferral, or restructure. Missed payments without contact trigger default mechanics that limit options.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our partner-lender book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
