The all-in cost of super mid-size jets, line by line
Buyers who finance super mid-size jets rarely fund just the equipment. The actual loan principal is the bundle of items the lender wires to the seller, and that bundle is bigger than the spec sheet implies. The list below covers what shows up on the funding statement.
Base equipment. The unit itself, in the configuration the seller is offering.
For super mid-size jets, base pricing typically runs $18M to $25.2M depending on configuration, year, hours, and condition.
Attachments, options, and add-ons.
Buyer-selected items show up on the invoice as separate lines. These are financeable in nearly every case. The decision is whether to roll them into the loan principal or pay them out of pocket at delivery.
Delivery, setup, and training.
Delivery and setup typically add 1 to 4 percent of base price; training, where the dealer or manufacturer sends a representative on site, runs $1,500 to $5,000. Both are financeable and both are negotiable.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Optional but common. Pricing typically runs $1,000 to $10,000 depending on equipment cost and coverage. Financeable. Decide whether to roll the warranty in before you sign the funding documents, not after.
The buyer profiles we see most on super mid-size jets deals
Equipment financing is more buyer-driven than the rate sheets imply. Two applications for the same super mid-size jets at the same price can land at meaningfully different rates because of where the buyer sits on the four profiles below. Knowing where you fit lets you frame the application to its strongest reading.
The seasonal operator
A business with revenue that concentrates in certain months. Lenders price this risk by either requesting larger down payments, asking for proof of working capital reserves, or structuring seasonal payment skips that match the revenue pattern.
The expansion buyer
A business in growth mode, opening a second location or a second line, with revenue from the existing operation supporting the new debt. Lenders weigh the existing operation strength against the unproven contribution from the new unit; deals usually close on the strength of the existing book.
The cash-rich buyer
A business that could pay cash but chooses to finance for tax benefit (Section 179 election with the financed equipment) or to preserve working capital for higher-return uses. These borrowers often look at $1 buyout structures because the tax treatment matches a purchase.
The grant-leveraged buyer
A business with a grant award, set-aside, or rebate that covers part of the equipment cost. The lender funds the remainder. The grant documentation goes into the file at application; timing of the grant disbursement versus loan funding is the detail that determines structure.
How lenders evaluate a super mid-size jets application
Underwriting on super mid-size jets financing weights the borrower side first and the equipment side second. The borrower factors below carry the most influence on rate, term, and down payment. Knowing how each maps to your specific situation lets you put the application together so the strong parts stand out.
- Bank statement analysis. Three to twelve months of business bank statements. Lenders look at average daily balance, monthly deposit count, NSF activity, and overall cash flow stability. This is where seasonal businesses get fairly priced if they have the records.
- Geographic operating territory. Where the equipment will operate matters. Some lenders prefer single-state operation; others price interstate or cross-border use differently. The lender match changes if the equipment will operate outside the home state regularly.
- Equipment as collateral. The equipment itself secures the loan. Asset class, age, condition, configuration, and resale market depth all factor into how lenders advance against the cost.
- Documented backlog or pipeline. Signed contracts, outstanding purchase orders, or a documented work backlog support the application story. For service businesses in particular, a pipeline that justifies the new equipment closes deals faster than projections alone.
- Use of equipment. Will the asset generate revenue immediately, will it replace an existing producing asset, or is it additive capacity. Revenue-replacement deals close most easily.
Diligence on super mid-size jets: the items that matter
Equipment financing on super mid-size jets closes cleanly when the pre-purchase walk catches the items below. When it does not, the issues surface post-funding, and the lender owns nothing of the resolution. Read the seller representation against the items below before signing.
- Manufacturer warranty status. On used equipment, confirm what is left of the original manufacturer warranty. Some warranties transfer with title and continue; others are tied to the original owner. The remaining warranty has dollar value and should factor into the purchase price.
- Wear items documented. Tires, tracks, undercarriage, cutting edges, brakes. Photograph and note remaining life. These are the items that will need replacement first and that buyers under-budget for.
- Pre-funding photo set. Take a comprehensive photo set of the equipment at the time of purchase signing: serial number, hour meter, condition of major systems, attachments, and any documented damage. This photo set goes into your records and into the lender file if requested.
- Emissions compliance. For diesel-powered equipment, confirm the unit meets current emissions requirements for the state and operation it will be used in. Tier 4 final compliance, urea/DEF system status, and after-treatment health all affect both legality of use and resale value.
- Attachment compatibility. For machinery with attachments, confirm the attachments included are compatible with the base unit configuration (quick-coupler standards, hydraulic pressure ratings, mounting interfaces). Buying attachments that do not fit is a common surprise on used equipment with mixed-vintage components.
- Hydraulics and ancillary systems. Full range of motion on every hydraulic function, no leaks, smooth operation, no chatter or pump whine. Hydraulic repairs on heavy equipment run into five figures fast.
Where super mid-size jets deals go sideways post-funding
Every one of the issues below is documented on the funding paperwork. The buyer signed off on each. The buyer surprise comes from the gap between what the dealer said in conversation and what the documents actually say. Read the documents at signing rather than after.
UCC blanket lien
A standard equipment loan creates a UCC-1 filing against the specific equipment. Some lenders file a blanket UCC against all business assets, which limits your ability to add other financing later without subordination agreements. Read the security agreement before signing.
Down payment timing
Your down payment is typically due at funding, not application. Lenders verify the source of down payment funds for transactions above certain thresholds. Wiring down payment money from a personal account into the business account immediately before funding can flag the deal for additional documentation.
Add-on funding within the deal
During the application or document review stage, some borrowers add items (extended warranty, training, additional configuration) without realizing the loan amount is re-quoted at the higher figure. Each addition can change the rate, term, and approval terms. Confirm the final loan amount before signing rather than tracking changes piecemeal.
Tax exemption not claimed at funding
If your equipment qualifies for a sales-tax exemption (manufacturing, agriculture, certain non-profit uses), the exemption certificate must be submitted at the time of the purchase to apply. Submitting it after the fact often means filing for a refund with the state, which takes months. Confirm the exemption status before signing.
Quick answer
Super Mid-Size Jets financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
Quick answers
Direct answers to the questions we hear most on super mid-size jets applications. Each answer is one we have given to a real buyer in the last quarter.
What is the typical APR on equipment financing?
Standard prime credit equipment financing runs 7 to 11 percent APR depending on equipment type, term length, and lender. Mid-tier credit runs 9 to 13 percent. Specialty programs for credit-challenged or startup borrowers run 12 to 18 percent. Manufacturer captive promotional financing can run 0 to 6 percent.
Can I finance used equipment?
Yes. Used equipment financing is a major category, with most lenders willing to fund equipment up to 5 to 10 years old. Older equipment requires specialty programs with shorter terms and higher rates. Authorized refurbished equipment from OEM-direct programs often qualifies for new-equipment-equivalent terms.
What does "soft-pull pre-qualification" actually check?
A soft pull pulls FICO and the basics of credit report (open accounts, payment history, derogatory marks) without affecting score. Combined with the application details (TIB, revenue, equipment), it determines which lender programs the borrower qualifies for and at what indicative rates.
Do I need a personal guarantee?
Most equipment loans for small and mid-size businesses require personal guarantee from the principals. Large established businesses with strong financials sometimes get non-recourse structures. Startup and credit-challenged applications always require personal guarantee, often with spouse co-sign.
Can I finance equipment from a private seller?
Yes, though private-party transactions add documentation requirements. The lender needs proof of clear title transfer, often through a third-party title services provider or escrow. The bill of sale needs to be clean and complete. Some lenders prefer dealer purchases due to documentation simplicity.
Can I finance equipment with a 600 FICO?
Yes. Programs exist for credit profiles below prime, typically requiring 10 to 25 percent down, a personal guarantee, and sometimes a contract or invoice supporting the use. Rates run 4 to 8 points above prime, and term length often caps at 48 months instead of 60 or 72.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a super mid-size jets deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- UCC-1 filing fees. $5 to $84 depending on state. Paid at filing; some lenders absorb, some pass to borrower.
- Software licenses. CAM, design, control, and operational software. Often subscription-based with annual renewal. Can run $5,000 to $50,000+ per seat depending on equipment category.
- Extended warranty or service contract. Optional but common. Annual cost runs 5 to 15 percent of equipment price on production equipment, 1 to 3 percent on commercial vehicles. Financeable with the equipment.
- Documentation and dealer fees. Lender doc fee runs $150 to $1,500. Dealer doc fee varies. Both may roll into financed amount or pay at signing.
- Operating consumables. Recurring costs not included in the equipment purchase: fuel, fluids, filters, tools, parts. Equipment-specific.
- End-of-term residual or buyout. Lease structures: fair market value buyout at term end (FMV lease) or stated residual amount (TRAC lease). Loan/EFA structures: $1 buyout or no buyout. Plan for this from day one on lease structures.
- Personal property tax (where applicable). Annual personal property tax assessed by counties in many states. Runs 0.5 to 3 percent of assessed value annually.
- Delivery and freight. Equipment delivery from dealer to operating site. Runs 1 to 5 percent of equipment price on standard equipment, higher on heavy or oversized equipment requiring permits and escorts.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Equipment becomes obsolete or no longer useful
Sell the equipment with lender consent (UCC release coordination), apply proceeds to loan payoff. If sale proceeds are below payoff, the deficiency becomes owed. Voluntary surrender to lender is sometimes available as an alternative.
Lender becomes difficult to work with
Most equipment loans are assumable or assignable with lender consent. Refinancing to a different lender is the more common path. Document the issues clearly; the situation rarely improves and the alternatives exist.
Equipment lien still showing after loan payoff
Lender is required to terminate the UCC-1 within a defined window after payoff (varies by state). If termination has not occurred, request a UCC termination statement from the lender. Borrower can sometimes file UCC termination directly if lender is unresponsive.
Pre-payment penalty obstacles to refinancing
Calculate the breakeven: penalty cost vs. interest savings on refinanced rate. Common breakeven is 12-18 months. If you expect to keep the equipment 24+ more months at lower rate, the penalty usually pays back.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our partner-lender book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
