Inside the eddy current separators invoice: what gets rolled in
Most surprises in eddy current separators financing trace back to the line items between the equipment quote and the funded amount. The lender is funding what is on the bill of sale plus a defined set of allowable additions. The buyer often signs without reading which additions are in or out.
Base equipment. The unit itself, in the configuration the seller is offering.
For eddy current separators, base pricing typically runs $280K to $392K depending on configuration, year, hours, and condition.
Attachments, options, and add-ons.
Buyer-selected items show up on the invoice as separate lines. These are financeable in nearly every case. The decision is whether to roll them into the loan principal or pay them out of pocket at delivery.
Delivery, setup, and training.
For equipment that ships from a distant dealer to a remote job site, delivery and rigging can add 2 to 5 percent of base price. On eddy current separators specifically, mobilization to the work site after delivery is the buyer responsibility unless negotiated otherwise.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Optional but common. Pricing typically runs $1,000 to $10,000 depending on equipment cost and coverage. Financeable. Decide whether to roll the warranty in before you sign the funding documents, not after.
Four eddy current separators borrowers we route every week
The profile of the buyer matters as much as the equipment when underwriters price a eddy current separators deal. The four profiles below cover roughly 80 percent of the applications we route. Each has a typical structure, a typical down payment expectation, and a typical lender match.
The expansion buyer
A business in growth mode, opening a second location or a second line, with revenue from the existing operation supporting the new debt. Lenders weigh the existing operation strength against the unproven contribution from the new unit; deals usually close on the strength of the existing book.
The fleet adder
An operator adding the fifth, sixth, or twentieth unit to an existing fleet. Lenders look at portfolio concentration on their side, but if the borrower has been paying on prior units cleanly, the next deal is straightforward.
The capacity-doubling buyer
An operator adding a second shift, a second line, or duplicate equipment to meet existing demand. Cleanest story to underwrite because the demand is already documented in the historical revenue. Loan term often matches the equipment useful life rather than being shortened against perceived risk.
The diversification buyer
An established operator adding a new equipment class outside their core business (a trucking firm adding a tow truck, a landscaper adding paving equipment). The story to the lender hinges on related-experience and a plausible revenue path; expect questions about how the new asset will be put to use.
The factors that move the rate on eddy current separators financing
When our partner lenders evaluate eddy current separators, they price the borrower against five factors that have stable weights across the industry. The equipment itself is the easier part of the file. The borrower factors below are where the actual underwriting happens.
- Existing debt service. Lenders look at total monthly debt obligations against cash flow. Adding a new payment that pushes the debt service coverage ratio below 1.20 typically requires additional support or a larger down payment.
- Equipment as collateral. The equipment itself secures the loan. Asset class, age, condition, configuration, and resale market depth all factor into how lenders advance against the cost.
- Industry sector. Some industries get standard pricing, some get a premium, some get a discount. Long-term stable sectors with low default rates (utility infrastructure, established medical, government contractors) typically price favorably.
- Business credit profile. D&B Paydex, Experian Intelliscore, and trade references from current vendors. Stronger business credit reduces personal-guarantee scope and improves the rate.
- Use of equipment. Will the asset generate revenue immediately, will it replace an existing producing asset, or is it additive capacity. Revenue-replacement deals close most easily.
What to confirm before signing on eddy current separators
Our partner lenders fund based on what is on the bill of sale. The bill of sale is the seller representation, signed off by the buyer at delivery. Catching gaps between what was represented and what was delivered is a buyer responsibility. The items below are the ones we see signed past most often.
- Attachment compatibility. For machinery with attachments, confirm the attachments included are compatible with the base unit configuration (quick-coupler standards, hydraulic pressure ratings, mounting interfaces). Buying attachments that do not fit is a common surprise on used equipment with mixed-vintage components.
- Emissions compliance. For diesel-powered equipment, confirm the unit meets current emissions requirements for the state and operation it will be used in. Tier 4 final compliance, urea/DEF system status, and after-treatment health all affect both legality of use and resale value.
- Recall and campaign status. Manufacturer recalls and service campaigns sometimes go uncompleted on used equipment. Verify outstanding recalls before purchase; some are mandatory and prevent the equipment from being registered or operated in certain jurisdictions until completed.
- Comparable sales data. Pricing checked against recent comparable sales from auction sites, dealer listings, and trade publications. A unit priced 15 percent above market signals either a premium configuration or a seller hoping the buyer does not check.
- Service history complete. Maintenance records back to first owner where possible. Gaps in service history reduce both lender comfort and resale value.
- Engine and powertrain test. Cold start, warm operation, load test if applicable. Diesel equipment in particular masks issues at warm-running temperature that surface on cold start.
The post-funding issues we see most on eddy current separators
The patterns below are not unique to eddy current separators. They are the standard places where equipment finance transactions surprise the borrower post-funding. Each is preventable at the application or document-review stage.
Late payment cascading fees
A 10-day late payment on an equipment loan typically triggers a late fee of 5 to 10 percent of the payment amount. Some contracts also trigger default interest, which jumps the rate by 4 to 6 points until the account cures. The dollar impact of a single missed payment can run into the hundreds.
ACH authorization scope
The funding documents authorize the lender to ACH debit your account for monthly payments. Some authorizations are limited to the regular monthly payment; others give the lender authority to debit late fees, NSF fees, or other charges. Read the ACH authorization clause and limit it where you can.
UCC blanket lien
A standard equipment loan creates a UCC-1 filing against the specific equipment. Some lenders file a blanket UCC against all business assets, which limits your ability to add other financing later without subordination agreements. Read the security agreement before signing.
Pre-payment penalties
Equipment loans often carry pre-payment penalties for the first 12 to 36 months of the term. Standard structures range from 3 percent of the payoff in year one declining to zero by year three, to a flat fee of $500 to $2,000. If you expect to refinance or pay the loan off early, understand the penalty math before signing.
Quick answer
Eddy Current Separators financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
Quick answers
Direct answers to the questions we hear most on eddy current separators applications. Each answer is one we have given to a real buyer in the last quarter.
What is an app-only program?
App-only means the lender approves the deal based on a credit application without requiring full business financials. Typically capped at $150,000 to $250,000 transaction size depending on lender. Decisions are faster (often same-day) and documentation is minimal. Above the app-only threshold, full financials are required.
Can I get a tax deduction on a leased equipment?
Yes. Operating lease payments deduct fully as business expense in the year paid. Capital lease (EFA $1 buyout) structures get depreciation treatment, which often allows Section 179 immediate expensing. Talk to your tax preparer about the specific structure before signing.
EFA vs loan, which is better?
They function identically for tax and ownership purposes. EFA documentation is slightly simpler and faster to close on app-only programs. Loan documentation is more traditional. The rate and structure are typically equivalent. EFA is more common in modern equipment finance, loan structure is more common in bank-originated deals.
What is the minimum credit score for equipment financing?
There is no single minimum across the industry. Prime programs start at 720+. Mid-tier programs work down to 660. Specialty programs handle 580 to 640 with structured down payment and personal guarantee. Below 580 is rare but exists in narrow specialty programs.
What is a balloon payment?
A balloon payment is a large final payment at the end of a loan term that is not fully amortized through monthly payments. Common on shorter terms with longer-life equipment. Borrowers either refinance the balloon at end of term, pay it cash, or include it in budgeting from day one. Most equipment loans amortize fully without balloons.
How much down payment is typical?
Standard programs run 0 to 10 percent down on new equipment for established businesses with prime credit. 5 to 20 percent down on used equipment. 15 to 30 percent on credit-challenged or startup applications. Fleet and replacement deals often qualify for zero down.
How we route the decision
The financing structure that fits depends on the actual situation. Below are the most common decision branches we walk through with buyers, in plain "if X, then Y" form.
- If You are planning a Section 179 election close to year-end
- Then Confirm placed-in-service date can be hit before December 31. Equipment ordered but not delivered/commissioned does not qualify for current-year §179, regardless of payment status.
- If You have existing equipment loans in good standing with this lender
- Then Your application qualifies for relationship pricing. App-only programs often skip financials when you have a clean history with the lender.
- If Your business operates across multiple states
- Then Confirm where to file the UCC-1 (state of incorporation vs state of equipment location). Standard practice files in state of incorporation; check with counsel on edge cases.
- If You are buying equipment that will be sub-rented or leased to others
- Then Confirm at application. Sub-rental changes underwriting analysis (revenue stability, asset risk) and may require a different program than owner-account use.
- If You plan to keep the equipment past the financing term
- Then Use a loan or $1 buyout EFA structure. Operating lease and FMV lease structures cost more on a keep-past-term basis because of the residual buyout.
Timeline expectations
What actually happens day-by-day, from application to equipment in service. Most buyers underestimate one or two of these steps; knowing them up front prevents surprises.
Apportioned plate registration (trucking)
2 to 4 weeks
New-authority trucking operators need apportioned plates before crossing state lines. Plan this into the funding timeline; temporary trip permits bridge the gap at higher per-state cost.
Placed-in-service date documentation
Same-day as commissioning
For Section 179 and depreciation purposes, the placed-in-service date is when the equipment is delivered, installed, and operationally ready. Document this date carefully for tax purposes.
Equipment delivery and inspection
1 day to 16 weeks
Wide range depending on equipment type. In-stock equipment delivers in days. Custom-configured manufacturing equipment runs 8-16 weeks. Imported equipment runs 12-24 weeks.
Insurance binder issuance
Same-day to 24 hours
Commercial auto and equipment insurance binders typically issue same-day from existing carriers. New policies for new businesses can run 2-5 business days to bind.
Title transfer on titled equipment
1 to 4 weeks
Title transfer through state DMV adds weeks to closing on titled equipment. Out-of-state transfers run on the longer end. Title escrow accelerates this in many cases.
Refinancing existing equipment loan
2 to 4 weeks
Refinancing requires payoff of existing loan, UCC release from prior lender, and funding of new loan. The UCC release coordination drives most of the timing.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our partner-lender book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
