Where the financed amount comes from on Harvesters (Tracked)
The funding statement on a Harvesters (Tracked) deal looks different from the dealer quote. The dealer quote highlights the equipment and configuration. The funding statement breaks out every dollar the lender is financing, in the order the lender lists them. Reading both side by side at signing is the discipline that prevents post-funding surprise.
Base equipment. The unit itself, in the configuration the seller is offering.
For Harvesters (Tracked), base pricing typically runs $480K to $672K depending on configuration, year, hours, and condition.
Attachments, options, and add-ons.
Buyer-selected items show up on the invoice as separate lines. These are financeable in nearly every case. The decision is whether to roll them into the loan principal or pay them out of pocket at delivery.
Delivery, setup, and training.
For equipment that ships from a distant dealer to a remote job site, delivery and rigging can add 2 to 5 percent of base price. On Harvesters (Tracked) specifically, mobilization to the work site after delivery is the buyer responsibility unless negotiated otherwise.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Optional but common. Pricing typically runs $1,000 to $10,000 depending on equipment cost and coverage. Financeable. Decide whether to roll the warranty in before you sign the funding documents, not after.
Four Harvesters (Tracked) borrowers we approve every week
The profile of the buyer matters as much as the equipment when our teams price a Harvesters (Tracked) deal. The four profiles below cover roughly 80 percent of our applications. Each has a typical structure, a typical down payment expectation, and a typical program fit.
The grant-leveraged buyer
A business with a grant award, set-aside, or rebate that covers part of the equipment cost. We fund the remainder. The grant documentation goes into the file at application; timing of the grant disbursement versus loan funding is the detail that determines structure.
The fleet adder
An operator adding the fifth, sixth, or twentieth unit to an existing fleet. Lenders look at portfolio concentration on their side, but if the borrower has been paying on prior units cleanly, the next deal is straightforward.
The growing operator
A two-year-old business with two existing units and a third on order to chase the next contract. We see this profile most often in trades, fleet, and field services. Lenders weigh the equipment as collateral, then look at revenue trajectory and time in business. Most growing operators qualify for standard programs at fair-to-good credit.
The seasonal operator
A business with revenue that concentrates in certain months. We price seasonal risk by either requesting larger down payments, asking for proof of working capital reserves, or structuring seasonal payment skips that match the revenue pattern.
Inside our team view of a Harvesters (Tracked) deal
If you want to understand why two Harvesters (Tracked) deals at identical price land at different rates, the answer is in the five borrower factors below. Lender pricing on the equipment side is reasonably standardized. Lender pricing on the borrower side has real spread.
- Bank statement analysis. Three to twelve months of business bank statements. Lenders look at average daily balance, monthly deposit count, NSF activity, and overall cash flow stability. This is where seasonal businesses get fairly priced if they have the records.
- Existing debt service. Lenders look at total monthly debt obligations against cash flow. Adding a new payment that pushes the debt service coverage ratio below 1.20 typically requires additional support or a larger down payment.
- Use of equipment. Will the asset generate revenue immediately, will it replace an existing producing asset, or is it additive capacity. Revenue-replacement deals close most easily.
- Financial statement quality. For transactions above $250,000, lenders weight the quality of financial statements: are they CPA-prepared, are they current within 90 days, do they reconcile to bank statements. Strong financial reporting opens up better pricing on larger transactions.
- Equipment as collateral. The equipment itself secures the loan. Asset class, age, condition, configuration, and resale market depth all factor into how lenders advance against the cost.
Diligence on Harvesters (Tracked): the items that matter
Equipment financing on Harvesters (Tracked) closes cleanly when the pre-purchase walk catches the items below. When it does not, the issues surface post-funding, and the lender owns nothing of the resolution. Read the seller representation against the items below before signing.
- Hydraulics and ancillary systems. Full range of motion on every hydraulic function, no leaks, smooth operation, no chatter or pump whine. Hydraulic repairs on heavy equipment run into five figures fast.
- Engine and powertrain test. Cold start, warm operation, load test if applicable. Diesel equipment in particular masks issues at warm-running temperature that surface on cold start.
- Pre-funding photo set. Take a complete photo set of the equipment at the time of purchase signing: serial number, hour meter, condition of major systems, attachments, and any documented damage. This photo set goes into your records and into the lender file if requested.
- Hours-meter or odometer history. Beyond the current reading, confirm the historical pattern of use. A unit with 4,000 hours from regular daily use is different from a unit with 4,000 hours from intermittent project work. Service records, when available, document the use pattern.
- Recall and campaign status. Manufacturer recalls and service campaigns sometimes go uncompleted on used equipment. Verify outstanding recalls before purchase; some are mandatory and prevent the equipment from being registered or operated in certain jurisdictions until completed.
- Emissions compliance. For diesel-powered equipment, confirm the unit meets current emissions requirements for the state and operation it will be used in. Tier 4 final compliance, urea/DEF system status, and after-treatment health all affect both legality of use and resale value.
Where Harvesters (Tracked) deals go sideways post-funding
Every one of the issues below is documented on the funding paperwork. The buyer signed off on each. The buyer surprise comes from the gap between what the dealer said in conversation and what the documents actually say. Read the documents at signing rather than after.
Title and registration delays
For titled equipment (trucks, trailers, certain motorized assets), we hold the title and you carry the registration. State DMV processing delays can leave you with a temporary permit for 30 to 90 days after funding. Plan around it for any equipment that needs to be on the road immediately after delivery.
Trade-in payoff timing
If your transaction includes a trade-in with an existing lien, the new lender pays off the trade-in lien as part of the funding. Verify the trade-in payoff amount the new lender uses matches the actual payoff from the prior lender (which can include accrued interest and fees through the funding date). A $500 to $2,000 gap is common if this is not reconciled.
EFA versus loan documentation differences
An Equipment Finance Agreement looks like a lease to a casual reader but behaves like a loan. Buyers who do not understand the structure sometimes try to apply lease-specific tax treatment to an EFA, or vice versa. Read the structure on the front page of the funding documents and confirm with your CPA before electing tax treatment.
Vendor financing disguised as direct
Some equipment dealers present vendor-arranged financing as the only path, when independent equipment lenders would beat the rate by 1 to 3 points for the same borrower. Always get at least one independent quote before accepting dealer financing on a transaction over $50,000.
Quick answer
Harvesters (Tracked) financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
Timeline expectations
What actually happens day-by-day, from application to equipment in service. Most buyers underestimate one or two of these steps; knowing them up front prevents surprises.
Decision to document signing
1 to 3 business days
Borrower review and signing of credit documents and personal guarantee. Most delays here are borrower-side rather than lender-side.
Application submission to decision
24 hours to 5 business days
App-only programs decision same-day or next-day. Full-financials programs run 3-5 business days as the file moves through credit, then operations.
Wire transfer cutoff times
Typically 2-3pm PT / 5-6pm ET
After cutoff, wire processes next business day. Late-Friday signings often delay funding until Monday or Tuesday.
Refinancing existing equipment loan
2 to 4 weeks
Refinancing requires payoff of existing loan, UCC release from prior lender, and funding of new loan. The UCC release coordination drives most of the timing.
UCC-1 filing and search
Filing: same-day. Search: 1-2 business days
UCC-1 financing statement files electronically same-day in most states. Pre-funding UCC search to confirm no existing liens runs 1-2 business days.
Equipment delivery and inspection
1 day to 16 weeks
Wide range depending on equipment type. In-stock equipment delivers in days. Custom-configured manufacturing equipment runs 8-16 weeks. Imported equipment runs 12-24 weeks.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a harvesters (tracked) deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- Pre-payment penalties. Standard early-payoff penalty: 3 percent of payoff in year one declining to zero by year three. Or flat fee of $500 to $2,000. Varies by lender.
- Operator training. Manufacturer-provided or third-party operator training. Runs $1,500 to $25,000 depending on equipment complexity. OSHA-compliant training required on many categories.
- Equipment purchase price. Base equipment price as quoted by the dealer. Negotiable, especially on used equipment and end-of-quarter new equipment.
- Software licenses. CAM, design, control, and operational software. Often subscription-based with annual renewal. Can run $5,000 to $50,000+ per seat depending on equipment category.
- End-of-term residual or buyout. Lease structures: fair market value buyout at term end (FMV lease) or stated residual amount (TRAC lease). Loan/EFA structures: $1 buyout or no buyout. Plan for this from day one on lease structures.
- Personal property tax (where applicable). Annual personal property tax assessed by counties in many states. Runs 0.5 to 3 percent of assessed value annually.
- Operating consumables. Recurring costs not included in the equipment purchase: fuel, fluids, filters, tools, parts. Equipment-specific.
- Documentation and dealer fees. Lender doc fee runs $150 to $1,500. Dealer doc fee varies. Both may roll into financed amount or pay at signing.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Equipment lease ending with no clear plan
Lease structures require purchase, return, or renewal at end of term, typically with 60-90 day notice. Missing the notice deadline can trigger automatic renewal or fair-market-value buyout. Decide and communicate before the deadline.
Pre-payment penalty obstacles to refinancing
Calculate the breakeven: penalty cost vs. interest savings on refinanced rate. Common breakeven is 12-18 months. If you expect to keep the equipment 24+ more months at lower rate, the penalty usually pays back.
Borrower cash flow stress mid-term
Contact us BEFORE missing a payment. We work with borrowers in temporary stress through extension, deferral, or restructure. Missed payments without contact trigger default mechanics that limit options.
Equipment lien still showing after loan payoff
Lender is required to terminate the UCC-1 within a defined window after payoff (varies by state). If termination has not occurred, request a UCC termination statement from the lender. Borrower can sometimes file UCC termination directly if lender is unresponsive.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our internal financing book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
