Where the financed amount comes from on feller bunchers (wheeled)
The funding statement on a feller bunchers (wheeled) deal looks different from the dealer quote. The dealer quote highlights the equipment and configuration. The funding statement breaks out every dollar the lender is financing, in the order the lender lists them. Reading both side by side at signing is the discipline that prevents post-funding surprise.
Base equipment. The unit itself, in the configuration the seller is offering.
For feller bunchers (wheeled), base pricing typically runs $380K to $532K depending on configuration, year, hours, and condition.
Attachments, options, and add-ons.
Buyer-selected items show up on the invoice as separate lines. These are financeable in nearly every case. The decision is whether to roll them into the loan principal or pay them out of pocket at delivery.
Delivery, setup, and training.
For equipment that ships from a distant dealer to a remote job site, delivery and rigging can add 2 to 5 percent of base price. On feller bunchers (wheeled) specifically, mobilization to the work site after delivery is the buyer responsibility unless negotiated otherwise.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Optional but common. Pricing typically runs $1,000 to $10,000 depending on equipment cost and coverage. Financeable. Decide whether to roll the warranty in before you sign the funding documents, not after.
Four feller bunchers (wheeled) borrowers we route every week
The profile of the buyer matters as much as the equipment when underwriters price a feller bunchers (wheeled) deal. The four profiles below cover roughly 80 percent of the applications we route. Each has a typical structure, a typical down payment expectation, and a typical lender match.
The succession buyer
A family member, key employee, or partner buying out an exiting owner and continuing the operation. The equipment may transfer as part of the deal or be re-financed at the buyer side. Lenders need clarity on which is happening before they price the transaction.
The growing operator
A two-year-old business with two existing units and a third on order to chase the next contract. We see this profile most often in trades, fleet, and field services. Lenders weigh the equipment as collateral, then look at revenue trajectory and time in business. Most growing operators qualify for standard programs at fair-to-good credit.
The contractor adding owned equipment
A business that has historically rented adding equipment to its own book to reduce rental spend. Lenders look favorably on this story because the rental cost is documented and the math is transparent. The conversion from rent to own is one of the cleanest financing applications.
The acquisition buyer
A business buying an existing operation that includes equipment. Some lenders treat this as a business loan, others as straight equipment financing. The split matters for both rate and what documents the lender will ask for.
The factors that move the rate on feller bunchers (wheeled) financing
When our partner lenders evaluate feller bunchers (wheeled), they price the borrower against five factors that have stable weights across the industry. The equipment itself is the easier part of the file. The borrower factors below are where the actual underwriting happens.
- Use of equipment. Will the asset generate revenue immediately, will it replace an existing producing asset, or is it additive capacity. Revenue-replacement deals close most easily.
- Equipment as collateral. The equipment itself secures the loan. Asset class, age, condition, configuration, and resale market depth all factor into how lenders advance against the cost.
- Industry sector. Some industries get standard pricing, some get a premium, some get a discount. Long-term stable sectors with low default rates (utility infrastructure, established medical, government contractors) typically price favorably.
- Existing debt service. Lenders look at total monthly debt obligations against cash flow. Adding a new payment that pushes the debt service coverage ratio below 1.20 typically requires additional support or a larger down payment.
- Owner background and depth. Years of related industry experience, prior ownership of similar equipment, and any documented success operating the asset class affect underwriting. New entrants to a class price differently from established operators expanding within their lane.
Diligence on feller bunchers (wheeled): the items that matter
Equipment financing on feller bunchers (wheeled) closes cleanly when the pre-purchase walk catches the items below. When it does not, the issues surface post-funding, and the lender owns nothing of the resolution. Read the seller representation against the items below before signing.
- Comparable sales data. Pricing checked against recent comparable sales from auction sites, dealer listings, and trade publications. A unit priced 15 percent above market signals either a premium configuration or a seller hoping the buyer does not check.
- Attachment compatibility. For machinery with attachments, confirm the attachments included are compatible with the base unit configuration (quick-coupler standards, hydraulic pressure ratings, mounting interfaces). Buying attachments that do not fit is a common surprise on used equipment with mixed-vintage components.
- Inspection by independent third party. For used equipment over $50,000, an independent mechanical inspection runs $300 to $800 and surfaces issues a walk-around will not catch. Lenders often require this for used equipment above a threshold.
- Wear items documented. Tires, tracks, undercarriage, cutting edges, brakes. Photograph and note remaining life. These are the items that will need replacement first and that buyers under-budget for.
- Service history complete. Maintenance records back to first owner where possible. Gaps in service history reduce both lender comfort and resale value.
- Recall and campaign status. Manufacturer recalls and service campaigns sometimes go uncompleted on used equipment. Verify outstanding recalls before purchase; some are mandatory and prevent the equipment from being registered or operated in certain jurisdictions until completed.
Patterns to watch for on feller bunchers (wheeled) documents
Borrowers who run into trouble on feller bunchers (wheeled) financing almost never do so because of fraud or bad faith. They do so because something in the funding documents was different from what was discussed in conversation. The patterns below are the most common spots where that gap shows up.
Vendor financing disguised as direct
Some equipment dealers present vendor-arranged financing as the only path, when independent equipment lenders would beat the rate by 1 to 3 points for the same borrower. Always get at least one independent quote before accepting dealer financing on a transaction over $50,000.
Insurance loss-payee language
The insurance policy must name the lender as loss payee for the full life of the loan. Verify the loss-payee language matches exactly what the lender requires (including their address and entity name). A mismatched loss payee often results in lender-placed insurance at three to five times open-market cost while the issue is resolved.
Title and registration delays
For titled equipment (trucks, trailers, certain motorized assets), the lender holds the title and you carry the registration. State DMV processing delays can leave you with a temporary permit for 30 to 90 days after funding. Plan around it for any equipment that needs to be on the road immediately after delivery.
UCC blanket lien
A standard equipment loan creates a UCC-1 filing against the specific equipment. Some lenders file a blanket UCC against all business assets, which limits your ability to add other financing later without subordination agreements. Read the security agreement before signing.
Quick answer
Feller Bunchers (Wheeled) financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
Quick answers
Direct answers to the questions we hear most on feller bunchers (wheeled) applications. Each answer is one we have given to a real buyer in the last quarter.
What happens if I miss a payment?
A 10-day late payment typically triggers a late fee of 5 to 10 percent of the payment amount. Some contracts also trigger default interest, jumping the rate by 4 to 6 points until the account cures. Repeated late payments can trigger acceleration of the balance and equipment repossession.
How much down payment is typical?
Standard programs run 0 to 10 percent down on new equipment for established businesses with prime credit. 5 to 20 percent down on used equipment. 15 to 30 percent on credit-challenged or startup applications. Fleet and replacement deals often qualify for zero down.
Can I finance equipment from a private seller?
Yes, though private-party transactions add documentation requirements. The lender needs proof of clear title transfer, often through a third-party title services provider or escrow. The bill of sale needs to be clean and complete. Some lenders prefer dealer purchases due to documentation simplicity.
Can I pay off my equipment loan early?
Yes, but many equipment loans carry pre-payment penalties in the first 12 to 36 months. Standard structures range from 3 percent of the payoff in year one declining to zero by year three. Some loans are open pre-payment with no penalty. Read the contract before signing if early payoff is likely.
Can I add attachments to an existing equipment loan?
Sometimes, depending on the lender and the original loan structure. Adding to an existing loan typically requires a loan modification or amendment. More commonly, attachments finance as a separate transaction at standard equipment terms, sometimes at a modest premium over the original equipment rate.
Can equipment financing affect my ability to get other loans?
Yes, in two ways: the UCC filing is a public record affecting subsequent lender review, and the monthly payment becomes a fixed obligation affecting debt service coverage ratios. Blanket UCC liens (rather than specific equipment UCC) can specifically limit subsequent financing capacity.
How we route the decision
The financing structure that fits depends on the actual situation. Below are the most common decision branches we walk through with buyers, in plain "if X, then Y" form.
- If You expect to pay the loan off within 12 months
- Then Check the pre-payment penalty before signing. Standard structures penalize early payoff in year one. Open pre-payment loans cost slightly more in stated rate but eliminate the penalty.
- If You plan to cycle equipment every 36 to 48 months
- Then A true operating lease with FMV residual often beats loan or EFA structures. The lower payment over a shorter term, with return option at the end, fits the use case.
- If Your business operates across multiple states
- Then Confirm where to file the UCC-1 (state of incorporation vs state of equipment location). Standard practice files in state of incorporation; check with counsel on edge cases.
- If You operate seasonally with revenue concentrated in specific months
- Then Ask for seasonal payment structures (skip payments in off-months, or ramped payments aligned to revenue). Many ag and landscape programs offer these at standard rates.
- If You are taking a Section 179 election this tax year
- Then Use a loan or $1 buyout EFA. Operating lease structures do not qualify for §179 election. Confirm equipment placed in service before December 31.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Equipment lease ending with no clear plan
Lease structures require purchase, return, or renewal at end of term, typically with 60-90 day notice. Missing the notice deadline can trigger automatic renewal or fair-market-value buyout. Decide and communicate before the deadline.
Pre-payment penalty obstacles to refinancing
Calculate the breakeven: penalty cost vs. interest savings on refinanced rate. Common breakeven is 12-18 months. If you expect to keep the equipment 24+ more months at lower rate, the penalty usually pays back.
Personal guarantee called on default
Personal guarantee makes the principal personally liable for the debt if the business defaults. Working with the lender on workout or restructure is the preferable path. Personal bankruptcy is a real consequence of unresolved default with personal guarantee.
Equipment used for something different from original purpose
Loan covenants sometimes restrict equipment use (no sub-rental, no out-of-state operation, etc.). Changing use materially without consent can trigger default. Request lender consent in writing before the change.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our partner-lender book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
