What you actually finance when you buy Strip-Till Equipment
Three quotes for the same Strip-Till Equipment can come back with three different numbers, and the gap is rarely the equipment itself. The gap is what each dealer rolls in, what each lender treats as cost-of-deal, and what shows up as separate paper at funding. Knowing the line items in advance tells you what you are actually negotiating.
Base equipment. The unit itself, in the configuration the seller is offering.
For Strip-Till Equipment, base pricing typically runs $95K to $133K depending on configuration, year, hours, and condition.
Attachments, options, and add-ons.
Buyer-selected items show up on the invoice as separate lines. These are financeable in nearly every case. The decision is whether to roll them into the loan principal or pay them out of pocket at delivery.
Delivery, setup, and training.
For equipment that ships from a distant dealer to a remote job site, delivery and rigging can add 2 to 5 percent of base price. On Strip-Till Equipment specifically, mobilization to the work site after delivery is the buyer responsibility unless negotiated otherwise.
Sales tax and use tax.
Sales or use tax is owed in most states and typically rolls into the financed amount; the lender remits it at closing. State conformity rules vary, and a few states offer manufacturing or production exemptions that change the math. Confirm the tax line with the seller before signing rather than discovering it at funding.
Extended warranty, service contract, and consumables.
Optional but common. Pricing typically runs $1,000 to $10,000 depending on equipment cost and coverage. Financeable. Decide whether to roll the warranty in before you sign the funding documents, not after.
The buyer profiles we see most on Strip-Till Equipment deals
Equipment financing is more buyer-driven than the rate sheets imply. Two applications for the same Strip-Till Equipment at the same price can land at meaningfully different rates because of where the buyer sits on the four profiles below. Knowing where you fit lets you frame the application to its strongest reading.
The upgrade buyer
A business trading out a working unit for a newer model with capabilities the current unit lacks. The story for lenders is fine, but the math (selling the old unit, paying off any remaining lien, redirecting the payment) needs to work cleanly before the new loan funds.
The contract-backed buyer
A business with a signed contract or purchase order requiring the equipment to fulfill. The contract supports the file for newer businesses; lenders sometimes structure the loan term to match the contract term. Counterparty quality matters here.
The diversification buyer
An established operator adding a new equipment class outside their core business (a trucking firm adding a tow truck, a landscaper adding paving equipment). The application narrative hinges on related-experience and a plausible revenue path; expect us to ask how the new asset will be put to use.
The contractor with a signed job
A buyer with an executed contract that the equipment will fulfill. We use the contract as supporting documentation, particularly for newer businesses. Expect to share the contract value, term, and counterparty.
Inside our team view of a Strip-Till Equipment deal
If you want to understand why two Strip-Till Equipment deals at identical price land at different rates, the answer is in the five borrower factors below. Lender pricing on the equipment side is reasonably standardized. Lender pricing on the borrower side has real spread.
- Owner background and depth. Years of related industry experience, prior ownership of similar equipment, and any documented success operating the asset class affect review. New entrants to a class price differently from established operators expanding within their lane.
- Bank statement analysis. Three to twelve months of business bank statements. Lenders look at average daily balance, monthly deposit count, NSF activity, and overall cash flow stability. This is where seasonal businesses get fairly priced if they have the records.
- Existing debt service. Lenders look at total monthly debt obligations against cash flow. Adding a new payment that pushes the debt service coverage ratio below 1.20 typically requires additional support or a larger down payment.
- Equipment as collateral. The equipment itself secures the loan. Asset class, age, condition, configuration, and resale market depth all factor into how lenders advance against the cost.
- Geographic operating territory. Where the equipment will operate matters. We price interstate and cross-border equipment use differently than single-state operation. The program tier shifts if the equipment will operate outside the home state regularly.
The Strip-Till Equipment pre-purchase walk
The dollars saved in equipment financing are made or lost at the pre-purchase walk, not in the rate negotiation. Saving 50 basis points on a $200,000 loan is real money; missing a $40,000 powertrain issue on the same unit is not recoverable. The walk-through items below cover what we have seen surface most often on funded deals that went sideways post-funding.
- Hydraulics and ancillary systems. Full range of motion on every hydraulic function, no leaks, smooth operation, no chatter or pump whine. Hydraulic repairs on heavy equipment run into five figures fast.
- Wear items documented. Tires, tracks, undercarriage, cutting edges, brakes. Photograph and note remaining life. These are the items that will need replacement first and that buyers under-budget for.
- Delivery and acceptance terms. Who pays for delivery, what condition the unit must be in at delivery, and what the buyer accepts. The funding documents will reference the delivery and acceptance certificate, which the lender uses to release payment to the seller.
- Manufacturer warranty status. On used equipment, confirm what is left of the original manufacturer warranty. Some warranties transfer with title and continue; others are tied to the original owner. The remaining warranty has dollar value and should factor into the purchase price.
- Title or MSO clean. Title for titled equipment, manufacturer statement of origin (MSO) for new equipment that has not been titled yet. Check for prior liens, salvage history, and that the seller is the title holder.
- Attachment compatibility. For machinery with attachments, confirm the attachments included are compatible with the base unit configuration (quick-coupler standards, hydraulic pressure ratings, mounting interfaces). Buying attachments that do not fit is a common surprise on used equipment with mixed-vintage components.
Patterns to watch for on Strip-Till Equipment documents
Borrowers who run into trouble on Strip-Till Equipment financing almost never do so because of fraud or bad faith. They do so because something in the funding documents was different from what was discussed in conversation. The patterns below are the most common spots where that gap shows up.
UCC blanket lien
A standard equipment loan creates a UCC-1 filing against the specific equipment. Some lenders file a blanket UCC against all business assets, which limits your ability to add other financing later without subordination agreements. Read the security agreement before signing.
Personal guarantee scope
On most equipment loans under $250,000, owners with 20 percent or more equity sign personal guarantees. Read the guarantee language. Some guarantees are limited to the specific loan; others are continuing and cover any future borrowing from the same lender. Limit the guarantee to the specific transaction when possible.
Trade-in payoff timing
If your transaction includes a trade-in with an existing lien, the new lender pays off the trade-in lien as part of the funding. Verify the trade-in payoff amount the new lender uses matches the actual payoff from the prior lender (which can include accrued interest and fees through the funding date). A $500 to $2,000 gap is common if this is not reconciled.
Co-borrower vs guarantor distinction
Some lenders require a co-borrower on the loan rather than a guarantor. The legal and tax implications differ materially. A co-borrower has direct payment obligation; a guarantor only steps in if the primary defaults. Make sure your funding documents reflect the role you intended to play, especially if multiple owners are involved.
Quick answer
Strip-Till Equipment financing typically prices at 7-12% APR for prime credit (720+ FICO) and 11-17% for fair-to-challenged credit (600-679). Standard terms run 36-72 months with 0-15% down. Approvals close in 24-72 hours on app-only programs (typically under $150K) and 3-7 business days on full-financials deals. Required documents: driver license, voided business check, last 3 months bank statements, and the equipment quote.
Quick answers
Direct answers to the questions we hear most on strip-till equipment applications. Each answer is one we have given to a real buyer in the last quarter.
What is a UCC-1 filing?
A UCC-1 financing statement is a public record we file that establishes a security interest in the financed equipment. It is filed at the Secretary of State (or equivalent) and runs for 5 years. The UCC must be terminated when the loan is paid off, and the borrower is responsible for confirming termination.
Can I finance equipment with a 600 FICO?
Yes. Programs exist for credit profiles below prime, typically requiring 10 to 25 percent down, a personal guarantee, and sometimes a contract or invoice supporting the use. Rates run 4 to 8 points above prime, and term length often caps at 48 months instead of 60 or 72.
Can I finance used equipment?
Yes. Used equipment financing is a major category, we typically fund equipment up to 5 to 10 years old. Older equipment runs through our specialty programs with shorter terms and higher rates. Authorized refurbished equipment from OEM-direct programs often qualifies for new-equipment-equivalent terms.
Do I need business credit to finance equipment?
No, personal credit is typically the primary factor for small and mid-size businesses. Business credit (D&B PAYDEX, Equifax Business, Experian Business) matters more on larger transactions and for established businesses. Building business credit over time supports better terms on subsequent deals.
What documents do I need to apply?
Driver license, voided business check, last 3 months bank statements, and a quote or invoice for the equipment. App-only programs (under $150K typically) require this much. Full-financials programs add 2 years of business tax returns and a recent P&L.
What is an EFA loan?
An Equipment Finance Agreement (EFA) is a structured equipment loan with a $1 buyout at the end of term. Functionally identical to a loan for tax purposes (you depreciate and own the equipment), but documented as a finance agreement. Most common structure for buyers planning to keep equipment past the financing term.
How we structure financing
The financing structure that fits depends on the actual situation. Below are the most common decision branches we walk through with buyers, in plain "if X, then Y" form.
- If You are a startup with strong principal credit and industry experience
- Then Apply to startup-specific programs that recognize principal credit and experience as substitutes for entity history. Expect higher down payment but a real path to approval.
- If You are buying equipment from a private seller
- Then Use a title services provider or escrow for the title transfer. We will not fund until title is clear; an escrow arrangement protects both buyer and seller during the title transfer window.
- If Your credit is below 640 and TIB is under 24 months
- Then Plan for 15 to 25 percent down, full personal guarantee, and a specialty program. Rates run 4 to 8 points above prime. Approval is still real but the structure is meaningfully different from prime programs.
- If You expect to pay the loan off within 12 months
- Then Check the pre-payment penalty before signing. Standard structures penalize early payoff in year one. Open pre-payment loans cost slightly more in stated rate but eliminate the penalty.
- If You plan to cycle equipment every 36 to 48 months
- Then A true operating lease with FMV residual often beats loan or EFA structures. The lower payment over a shorter term, with return option at the end, fits the use case.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Business ownership change during loan term
Most equipment loans are personally guaranteed and assumable with our consent during ownership change. The new owner submits an application similar to the original; we review and either consent or require payoff.
Equipment damage during the loan term
Insurance proceeds pay off the loan balance or fund replacement equipment with lender consent. The loan does not cancel automatically with the equipment loss; coordination with lender is required.
Personal guarantee called on default
Personal guarantee makes the principal personally liable for the debt if the business defaults. Working with us on workout or restructure is the preferable path. Personal bankruptcy is a real consequence of unresolved default with personal guarantee.
Lender becomes difficult to work with
Most equipment loans are assumable or assignable with lender consent. Refinancing to a different lender is the more common path. Document the issues clearly; the situation rarely improves and the alternatives exist.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our internal financing book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
