How we calculate the figures shown
The calculator uses standard equipment financing math: monthly payments are computed as a fixed amortization over the term, using the rate the borrower selects against the program template. We treat the rate as nominal annual, divided by twelve for the monthly factor, and we use the standard mortgage-style amortization formula. The payment shown is principal plus interest for the financed amount; it does not include sales tax (which most jurisdictions roll into the financed amount) or insurance.
The rate ranges we show by credit tier come from blended data across our partner lenders. We refresh these quarterly to track the rate environment. Your actual rate depends on credit profile, time in business, revenue, equipment, transaction size, and the specific lender that matches your application. Use the calculator output as a planning range, not a quote.
Where the calculator output gets refined in actual underwriting
Several factors that the calculator does not capture can move your actual payment up or down. Understanding the inputs that the calculator simplifies helps you read the output as a baseline that the lender will adjust against your specific deal.
Sales and use tax. Sales tax is owed in most states and is typically rolled into the financed amount, which adds to the monthly payment. Some equipment qualifies for sales tax exemption depending on use and jurisdiction. The calculator does not pre-compute sales tax because it varies by state and by use.
Documentation fee. Lender documentation fees of $150 to $1,500 are common and are either rolled into the financed amount or paid out of pocket. Either way, they show up in the APR calculation. The calculator shows the loan-side cost; the APR you eventually see in the funding documents is the all-in cost.
Origination structure. Some lenders price origination as a separate fee, others bake it into the rate. The calculator output assumes the rate represents the all-in cost. When you receive specific offers, read whether the rate includes origination or whether it is added separately.
Pre-payment provisions. The total cost shown in the calculator assumes you carry the loan to term. If you pay off early, the total cost is the sum of payments made plus any pre-payment penalty, minus any unearned finance charge rebate. For shorter holding periods, the effective cost can differ meaningfully from the calculator total.
Factors that drive your actual rate
The calculator output uses indicative rates by credit tier. The factors below explain where your actual rate is likely to land within the tier range.
- Personal credit of principals. For owners with 20 percent or more equity, personal FICO drives both the available program and the rate. The pull is soft at prequalification, hard at formal application with the chosen lender.
- Bank statement analysis. Three to twelve months of business bank statements. Lenders look at average daily balance, monthly deposit count, NSF activity, and overall cash flow stability. This is where seasonal businesses get fairly priced if they have the records.
- Industry sector. Some industries get standard pricing, some get a premium, some get a discount. Long-term stable sectors with low default rates (utility infrastructure, established medical, government contractors) typically price favorably.
- Existing debt service. Lenders look at total monthly debt obligations against cash flow. Adding a new payment that pushes the debt service coverage ratio below 1.20 typically requires additional support or a larger down payment.
- Documented backlog or pipeline. Signed contracts, outstanding purchase orders, or a documented work backlog support the application story. For service businesses in particular, a pipeline that justifies the new equipment closes deals faster than projections alone.
Pitfalls the calculator output cannot warn you about
The calculator handles payment math cleanly. It does not catch the patterns below, which show up in real funding documents and affect the all-in cost. Read the funding documents themselves; do not rely on a calculator output as your due-diligence step.
Pre-payment penalties
Equipment loans often carry pre-payment penalties for the first 12 to 36 months of the term. Standard structures range from 3 percent of the payoff in year one declining to zero by year three, to a flat fee of $500 to $2,000. If you expect to refinance or pay the loan off early, understand the penalty math before signing.
Trade-in payoff timing
If your transaction includes a trade-in with an existing lien, the new lender pays off the trade-in lien as part of the funding. Verify the trade-in payoff amount the new lender uses matches the actual payoff from the prior lender (which can include accrued interest and fees through the funding date). A $500 to $2,000 gap is common if this is not reconciled.
Vendor financing disguised as direct
Some equipment dealers present vendor-arranged financing as the only path, when independent equipment lenders would beat the rate by 1 to 3 points for the same borrower. Always get at least one independent quote before accepting dealer financing on a transaction over $50,000.
Personal guarantee scope
On most equipment loans under $250,000, owners with 20 percent or more equity sign personal guarantees. Read the guarantee language. Some guarantees are limited to the specific loan; others are continuing and cover any future borrowing from the same lender. Limit the guarantee to the specific transaction when possible.
Questions about the calculator output
Is there a minimum or maximum loan size?
Across our partner lender base, most programs run from a $10,000 minimum up to several million on a single transaction. The mid-range (roughly $25,000 to $500,000) has the deepest lender competition and best pricing.
Are the rates fixed for the loan term?
Most equipment loans and leases are fixed rate for the full term. Variable-rate equipment financing exists for certain larger transactions but is uncommon under $500,000.
Do I need to disclose other business debt to the lender?
Yes. Lenders calculate debt service coverage on total obligations. Not disclosing material debt can be treated as misrepresentation in the application. Existing business debt is normal and the application accommodates it.
Does the dealer get the loan funds, or do I?
Funds go to the seller directly in nearly all equipment financing. The lender wires the agreed amount to the seller after you sign the acceptance documents. You never see or handle the loan funds. This protects both the lender and you from misapplication of proceeds.
How does the lender verify the equipment exists and was delivered?
Standard verification: signed delivery and acceptance certificate from you, plus inspection of the equipment or photo verification depending on transaction size. For larger transactions, the lender may send an inspector. For smaller transactions, a signed certificate plus the seller invoice is often enough.
Quick answers
Direct answers to the questions we hear most on efa payment calculator applications. Each answer is one we have given to a real buyer in the last quarter.
Can I finance used equipment?
Yes. Used equipment financing is a major category, with most lenders willing to fund equipment up to 5 to 10 years old. Older equipment requires specialty programs with shorter terms and higher rates. Authorized refurbished equipment from OEM-direct programs often qualifies for new-equipment-equivalent terms.
How fast can I get funded?
Standard equipment loans on app-only programs (under $150K typically) close in 24 to 72 hours from doc submission. Full-financials programs run 3 to 7 business days. Titled equipment with title transfer adds 1 to 4 weeks.
Can equipment financing affect my ability to get other loans?
Yes, in two ways: the UCC filing is a public record affecting subsequent lender review, and the monthly payment becomes a fixed obligation affecting debt service coverage ratios. Blanket UCC liens (rather than specific equipment UCC) can specifically limit subsequent financing capacity.
How much down payment is typical?
Standard programs run 0 to 10 percent down on new equipment for established businesses with prime credit. 5 to 20 percent down on used equipment. 15 to 30 percent on credit-challenged or startup applications. Fleet and replacement deals often qualify for zero down.
Is equipment financing tax deductible?
The interest portion of equipment loan payments is deductible as a business expense. The equipment itself qualifies for depreciation or Section 179 immediate expensing if eligible. Lease payments on true operating leases deduct fully as business expense. Capital lease structures (EFA $1 buyout) get depreciation treatment.
What is a UCC-1 filing?
A UCC-1 financing statement is a public record filed by the lender that establishes a security interest in the financed equipment. It is filed at the Secretary of State (or equivalent) and runs for 5 years. The UCC must be terminated when the loan is paid off, and the borrower is responsible for confirming termination.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a efa payment calculator deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- Sales or use tax. State and local sales tax on the equipment. Rolls into financed amount in most states. Manufacturing and qualifying exemptions reduce or eliminate this in many states.
- Title transfer and registration. Titled equipment (trucks, trailers, some construction equipment) requires title transfer and registration. State-specific fees from $50 to $500+.
- Late payment fees and penalties. Late fees of 5 to 10 percent of payment if more than 10 days late. Default interest of 4 to 6 points may apply. Worth knowing before signing.
- Equipment purchase price. Base equipment price as quoted by the dealer. Negotiable, especially on used equipment and end-of-quarter new equipment.
- End-of-term residual or buyout. Lease structures: fair market value buyout at term end (FMV lease) or stated residual amount (TRAC lease). Loan/EFA structures: $1 buyout or no buyout. Plan for this from day one on lease structures.
- Delivery and freight. Equipment delivery from dealer to operating site. Runs 1 to 5 percent of equipment price on standard equipment, higher on heavy or oversized equipment requiring permits and escorts.
- Software licenses. CAM, design, control, and operational software. Often subscription-based with annual renewal. Can run $5,000 to $50,000+ per seat depending on equipment category.
- Tooling and accessories. Cutting tools, attachments, fixtures, and accessories specific to the equipment. Often quoted separately from base equipment. Can run 10 to 40 percent of equipment cost.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Equipment used for something different from original purpose
Loan covenants sometimes restrict equipment use (no sub-rental, no out-of-state operation, etc.). Changing use materially without consent can trigger default. Request lender consent in writing before the change.
Equipment damage during the loan term
Insurance proceeds pay off the loan balance or fund replacement equipment with lender consent. The loan does not cancel automatically with the equipment loss; coordination with lender is required.
Equipment serial number does not match UCC filing
Identify the error (dealer substitution, lender filing error, etc.) and resolve before subsequent financing. The UCC needs to match the actual collateral for enforceability. Lender amendment of the UCC handles this in most cases.
Lender becomes difficult to work with
Most equipment loans are assumable or assignable with lender consent. Refinancing to a different lender is the more common path. Document the issues clearly; the situation rarely improves and the alternatives exist.
