What Crest Capital offers borrowers
The Crest Capital equipment financing program covers a range of equipment classes, credit tiers, and transaction sizes. The standard program offers terms from 24 to 84 months on most equipment, with rate determined by credit tier, equipment age, and transaction size. The mid-range of program coverage (transactions between $25,000 and $500,000 on buyers with good credit) sees the most competitive pricing.
Larger transactions (above $500,000) typically route through the lender direct underwriting team, with a more involved review and slightly extended decision timeline. Smaller transactions (under $25,000) typically run through an automated decisioning system with same-day or next-day turnaround.
Our partner-lender relationship with Crest Capital covers the full program menu. When we route your application, the lender evaluates against their standard underwriting and returns terms based on your specific profile. We do not have favored pricing arrangements that move rate up or down; we have access to the same program any direct applicant would see, with the benefit of routing the application to the right desk on the lender side.
The factors that drive your Crest Capital rate
Across the deals we route to Crest Capital, six factors drive most of the rate spread between approvals. Understanding how each factor maps to your situation lets you forecast where your deal will land before you apply.
- Use of equipment. Will the asset generate revenue immediately, will it replace an existing producing asset, or is it additive capacity. Revenue-replacement deals close most easily.
- Equipment as collateral. The equipment itself secures the loan. Asset class, age, condition, configuration, and resale market depth all factor into how lenders advance against the cost.
- Business credit profile. D&B Paydex, Experian Intelliscore, and trade references from current vendors. Stronger business credit reduces personal-guarantee scope and improves the rate.
- Time in business. The single most weighted factor for most equipment lenders. Two years in business opens up the full program menu. Under one year narrows the lender pool and often requires larger down payment.
- Existing debt service. Lenders look at total monthly debt obligations against cash flow. Adding a new payment that pushes the debt service coverage ratio below 1.20 typically requires additional support or a larger down payment.
- Financial statement quality. For transactions above $250,000, lenders weight the quality of financial statements: are they CPA-prepared, are they current within 90 days, do they reconcile to bank statements. Strong financial reporting opens up better pricing on larger transactions.
What the application process looks like
Initial soft-pull prequalification. Through us, this is a three-minute application that returns a rate range and indicative terms without any impact on your credit score. The prequalification is based on the credit and revenue indicators you provide, plus a soft-pull bureau check.
Formal application to Crest Capital. When you accept the prequalification and choose to proceed, the formal application includes the documentation package (bank statements, tax returns, equipment quote, business documents). This goes to Crest Capital for underwriting. A hard credit pull happens at this stage with your consent.
Underwriting and decision. Standard decisions return in 24 to 72 hours. Larger transactions or applications that require additional documentation can extend to 5 to 10 business days. The lender either approves at the prequalified terms, approves at modified terms, requests additional information, or declines.
Document signing and funding. Approved applications proceed to document signing, typically electronic. The lender verifies equipment delivery and acceptance, then funds the seller. Time from document signing to seller funding runs 1 to 3 business days in most cases.
Tax treatment on Crest Capital programs
State conformity
States vary on whether they conform to federal Section 179 limits and bonus depreciation. A few states still cap Section 179 well below the federal amount or disallow bonus depreciation entirely. Your effective tax savings depend on both federal and state treatment.
Sales and use tax
Sales tax on the equipment is owed in most states. On a loan, sales tax is typically rolled into the financed amount. On a lease, sales tax is collected on each payment in many states. Equipment delivered out of state has different rules and exemptions in many jurisdictions.
Section 179 expensing
Allows a taxpayer to elect to deduct the cost of qualifying property as an expense in the year it is placed in service, subject to annual limits set by Congress. Most equipment used more than 50 percent for business qualifies. The election is made on Form 4562 with the tax return.
Patterns to watch for on Crest Capital deals
The patterns below show up across equipment financing transactions, including those routed to Crest Capital. None of these are unique to this lender. They are the standard points where buyer expectation and signed documentation can diverge.
Fleet vs single-unit pricing
When financing more than one unit, ask whether the lender treats it as a fleet transaction (often with better pricing) versus separate single-unit transactions. The difference can be 50 to 150 basis points on a multi-unit deal. Some lenders default to single-unit treatment unless the borrower asks for fleet structure.
Trade-in payoff timing
If your transaction includes a trade-in with an existing lien, the new lender pays off the trade-in lien as part of the funding. Verify the trade-in payoff amount the new lender uses matches the actual payoff from the prior lender (which can include accrued interest and fees through the funding date). A $500 to $2,000 gap is common if this is not reconciled.
Tax exemption not claimed at funding
If your equipment qualifies for a sales-tax exemption (manufacturing, agriculture, certain non-profit uses), the exemption certificate must be submitted at the time of the purchase to apply. Submitting it after the fact often means filing for a refund with the state, which takes months. Confirm the exemption status before signing.
ACH authorization scope
The funding documents authorize the lender to ACH debit your account for monthly payments. Some authorizations are limited to the regular monthly payment; others give the lender authority to debit late fees, NSF fees, or other charges. Read the ACH authorization clause and limit it where you can.
Common questions about Crest Capital financing
Do I need to disclose other business debt to the lender?
Yes. Lenders calculate debt service coverage on total obligations. Not disclosing material debt can be treated as misrepresentation in the application. Existing business debt is normal and the application accommodates it.
What if my business is structured as a sole prop with no separate business credit?
You can still finance equipment, but the lender will primarily underwrite on your personal credit and personal income. Sole props sometimes face higher down payment requirements and shorter terms than LLC or corporate borrowers. Forming an LLC and operating under it for a couple of years opens up more program options.
What happens if the equipment needs warranty repair during the loan term?
The loan and the warranty are independent. You continue making loan payments while the equipment is in warranty repair. Service contracts and extended warranties can be financed into the loan if you choose, with the cost rolled into the principal.
Can I add equipment to an existing loan?
Not typically. New equipment is financed as a separate transaction. Some lenders offer master lease lines that allow adding equipment under one umbrella, which works best for businesses that buy equipment regularly.
Are there programs for equipment under $25,000?
Yes. Most partner lenders maintain micro-ticket programs from $5,000 to $25,000 with abbreviated documentation, faster decisioning, and slightly higher rates than mid-range deals. The trade-off is speed for pricing; for time-sensitive small purchases, the micro-ticket route closes in a day or two.
What happens to the loan if the equipment is destroyed?
Insurance proceeds go to the lender first to pay off the remaining loan balance. Anything above the payoff goes to you. If the insurance does not cover the full payoff (deductible, depreciation in policy terms), you owe the gap. GAP coverage is available for an additional premium on most equipment classes.
Timeline expectations
What actually happens day-by-day, from application to equipment in service. Most buyers underestimate one or two of these steps; knowing them up front prevents surprises.
Apportioned plate registration (trucking)
2 to 4 weeks
New-authority trucking operators need apportioned plates before crossing state lines. Plan this into the funding timeline; temporary trip permits bridge the gap at higher per-state cost.
Refinancing existing equipment loan
2 to 4 weeks
Refinancing requires payoff of existing loan, UCC release from prior lender, and funding of new loan. The UCC release coordination drives most of the timing.
Application submission to decision
24 hours to 5 business days
App-only programs decision same-day or next-day. Full-financials programs run 3-5 business days as the file moves through credit, then operations.
Decision to document signing
1 to 3 business days
Borrower review and signing of credit documents and personal guarantee. Most delays here are borrower-side rather than lender-side.
Insurance binder issuance
Same-day to 24 hours
Commercial auto and equipment insurance binders typically issue same-day from existing carriers. New policies for new businesses can run 2-5 business days to bind.
UCC-1 filing and search
Filing: same-day. Search: 1-2 business days
UCC-1 financing statement files electronically same-day in most states. Pre-funding UCC search to confirm no existing liens runs 1-2 business days.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a crest capital deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- Extended warranty or service contract. Optional but common. Annual cost runs 5 to 15 percent of equipment price on production equipment, 1 to 3 percent on commercial vehicles. Financeable with the equipment.
- Documentation and dealer fees. Lender doc fee runs $150 to $1,500. Dealer doc fee varies. Both may roll into financed amount or pay at signing.
- Pre-payment penalties. Standard early-payoff penalty: 3 percent of payoff in year one declining to zero by year three. Or flat fee of $500 to $2,000. Varies by lender.
- Operating consumables. Recurring costs not included in the equipment purchase: fuel, fluids, filters, tools, parts. Equipment-specific.
- Personal property tax (where applicable). Annual personal property tax assessed by counties in many states. Runs 0.5 to 3 percent of assessed value annually.
- Tooling and accessories. Cutting tools, attachments, fixtures, and accessories specific to the equipment. Often quoted separately from base equipment. Can run 10 to 40 percent of equipment cost.
- Delivery and freight. Equipment delivery from dealer to operating site. Runs 1 to 5 percent of equipment price on standard equipment, higher on heavy or oversized equipment requiring permits and escorts.
- Title transfer and registration. Titled equipment (trucks, trailers, some construction equipment) requires title transfer and registration. State-specific fees from $50 to $500+.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Personal guarantee called on default
Personal guarantee makes the principal personally liable for the debt if the business defaults. Working with the lender on workout or restructure is the preferable path. Personal bankruptcy is a real consequence of unresolved default with personal guarantee.
Borrower discovers equipment was misrepresented at sale
The lender funded based on the bill of sale, not the equipment condition. Disputes between buyer and seller after funding are between those parties. The loan obligation continues regardless. Independent pre-purchase inspection prevents most of these situations.
Borrower cash flow stress mid-term
Contact the lender BEFORE missing a payment. Most lenders work with borrowers in temporary stress through extension, deferral, or restructure. Missed payments without contact trigger default mechanics that limit options.
Equipment used for something different from original purpose
Loan covenants sometimes restrict equipment use (no sub-rental, no out-of-state operation, etc.). Changing use materially without consent can trigger default. Request lender consent in writing before the change.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our partner-lender book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
