Recent bankruptcy equipment financing (within 24-60 months of discharge) accesses specialty programs that recognize post-bankruptcy credit rebuilding. Path to financing exists but with substantial requirements.
Documentation of bankruptcy circumstances, post-bankruptcy credit performance, and personal guarantee from any clean co-signers strengthens applications.
Our financing programs for Equipment Financing After Bankruptcy
The programs below describe the buckets we work in for this equipment. We match every application against the program tier that fits the credit profile, time in business, and structure preference. The program assignment is the single biggest driver of rate, term, and approval speed.
Post-bankruptcy specialty program
For borrowers 24-60 months post-discharge with rebuilt credit.
Issues specific to Equipment Financing After Bankruptcy deals
These are not the standard equipment-finance pitfalls. They are the patterns we see on this exact equipment, in this exact market, that buyers without recent experience tend to miss.
Bankruptcy chapter affects program access
Chapter 7 (full discharge) and Chapter 13 (reorganization) have different program implications. Document chapter and discharge date.
Time since discharge matters
Programs typically require 24+ months since discharge. 36-60 months is more favorable.
Co-signer with clean credit helps
Personal guarantee from co-signer with clean credit can substantially support post-bankruptcy applications.
Inside our review
Application review on financing affected by this topic follows a predictable order. Four factors carry most of the weight; understanding the order lets you put the application together to lead with strengths.
- Geographic operating territory. Where the equipment will operate matters. We price interstate and cross-border equipment use differently than single-state operation. The program tier shifts if the equipment will operate outside the home state regularly.
- Existing debt service. Lenders look at total monthly debt obligations against cash flow. Adding a new payment that pushes the debt service coverage ratio below 1.20 typically requires additional support or a larger down payment.
- Personal credit of principals. For owners with 20 percent or more equity, personal FICO drives both the available program and the rate. The pull is soft at prequalification, hard at formal application with the chosen lender.
- Use of equipment. Will the asset generate revenue immediately, will it replace an existing producing asset, or is it additive capacity. Revenue-replacement deals close most easily.
Common pitfalls
The patterns below show up repeatedly on financing transactions. Catching any of these at the application or document-review stage saves real money later.
Tax exemption not claimed at funding
If your equipment qualifies for a sales-tax exemption (manufacturing, agriculture, certain non-profit uses), the exemption certificate must be submitted at the time of the purchase to apply. Submitting it after the fact often means filing for a refund with the state, which takes months. Confirm the exemption status before signing.
Title and registration delays
For titled equipment (trucks, trailers, certain motorized assets), we hold the title and you carry the registration. State DMV processing delays can leave you with a temporary permit for 30 to 90 days after funding. Plan around it for any equipment that needs to be on the road immediately after delivery.
Vendor financing disguised as direct
Some equipment dealers present vendor-arranged financing as the only path, when independent equipment lenders would beat the rate by 1 to 3 points for the same borrower. Always get at least one independent quote before accepting dealer financing on a transaction over $50,000.
UCC blanket lien
A standard equipment loan creates a UCC-1 filing against the specific equipment. Some lenders file a blanket UCC against all business assets, which limits your ability to add other financing later without subordination agreements. Read the security agreement before signing.
What to verify before you sign
Lender funding documents reference the equipment and the transaction terms. Catching gaps between what was discussed and what is documented saves real money. The items below cover what to confirm before signing.
- Emissions compliance. For diesel-powered equipment, confirm the unit meets current emissions requirements for the state and operation it will be used in. Tier 4 final compliance, urea/DEF system status, and after-treatment health all affect both legality of use and resale value.
- Delivery and acceptance terms. Who pays for delivery, what condition the unit must be in at delivery, and what the buyer accepts. The funding documents will reference the delivery and acceptance certificate, which the lender uses to release payment to the seller.
- Pre-funding photo set. Take a complete photo set of the equipment at the time of purchase signing: serial number, hour meter, condition of major systems, attachments, and any documented damage. This photo set goes into your records and into the lender file if requested.
- Recall and campaign status. Manufacturer recalls and service campaigns sometimes go uncompleted on used equipment. Verify outstanding recalls before purchase; some are mandatory and prevent the equipment from being registered or operated in certain jurisdictions until completed.
- Engine and powertrain test. Cold start, warm operation, load test if applicable. Diesel equipment in particular masks issues at warm-running temperature that surface on cold start.
Common questions on this
What is the difference between rate and APR on the disclosure?
Rate is the interest rate before fees. APR includes the rate plus mandatory fees (doc fee, origination, certain insurance) expressed as an annualized cost. APR is what you want to compare across offers, not the rate.
Does the dealer get the loan funds, or do I?
Funds go to the seller directly in nearly all equipment financing. The lender wires the agreed amount to the seller after you sign the acceptance documents. You never see or handle the loan funds. This protects both the lender and you from misapplication of proceeds.
Will the lender finance equipment we are buying from a private seller?
Yes, we finance private-party transactions. The documentation looks slightly different from dealer transactions: bill of sale from the seller, lien-release if there is a prior loan, title work direct from the state. Expect 3 to 5 additional business days on the funding timeline.
Are there programs for equipment under $25,000?
Yes. We offer a micro-ticket program from $5,000 to $25,000 with abbreviated documentation, faster decisioning, and slightly higher rates than mid-range deals. The trade-off is speed for pricing; for time-sensitive small purchases, the micro-ticket route closes in a day or two.
Can I trade in equipment as part of the down payment?
Yes, on most loans. The trade value is treated as cash down for loan-to-cost calculations. We will want to see documentation of the trade-in and confirmation that any prior lien on the trade-in is being paid off through the transaction.
Can I pay off the loan early?
Yes, but check the pre-payment provision in your documents. Some structures carry a pre-payment penalty in the first 12 to 36 months. Others are open. Knowing the payoff math before signing prevents surprises if you decide to refinance or sell out of the equipment early.
Quick answer
Equipment financing at this credit profile accesses specific program tiers with rate ranges, down payment, and term length aligned to the credit risk. The exact program tier match comes from soft-pull pre-qualification against our program grid.
Quick answers
Direct answers to the questions we hear most on equipment financing after bankruptcy applications. Each answer is one we have given to a real buyer in the last quarter.
What is a UCC-1 filing?
A UCC-1 financing statement is a public record we file that establishes a security interest in the financed equipment. It is filed at the Secretary of State (or equivalent) and runs for 5 years. The UCC must be terminated when the loan is paid off, and the borrower is responsible for confirming termination.
How fast can I get funded?
Standard equipment loans on app-only programs (under $150K typically) close in 24 to 72 hours from doc submission. Full-financials programs run 3 to 7 business days. Titled equipment with title transfer adds 1 to 4 weeks.
Can I add attachments to an existing equipment loan?
Sometimes, depending on the program tier and the original loan structure. Adding to an existing loan typically requires a loan modification or amendment. More commonly, attachments finance as a separate transaction at standard equipment terms, sometimes at a modest premium over the original equipment rate.
How is interest calculated on equipment loans?
Most equipment loans use simple interest amortization. Each payment includes principal and interest portions, with the interest portion declining as the balance amortizes. EFA structures may use rate-factor pricing instead of stated APR; the dollar cost is similar but the math is different.
What is an EFA loan?
An Equipment Finance Agreement (EFA) is a structured equipment loan with a $1 buyout at the end of term. Functionally identical to a loan for tax purposes (you depreciate and own the equipment), but documented as a finance agreement. Most common structure for buyers planning to keep equipment past the financing term.
Can I finance equipment with a 600 FICO?
Yes. Programs exist for credit profiles below prime, typically requiring 10 to 25 percent down, a personal guarantee, and sometimes a contract or invoice supporting the use. Rates run 4 to 8 points above prime, and term length often caps at 48 months instead of 60 or 72.
Cost stack: what total ownership actually includes
The equipment purchase price is one line on the financed amount. The actual cost of ownership over the life of a equipment financing after bankruptcy deal includes the items below. Buyers who only budget for the purchase price often hit cash-flow surprise within the first 12 months.
- Tooling and accessories. Cutting tools, attachments, fixtures, and accessories specific to the equipment. Often quoted separately from base equipment. Can run 10 to 40 percent of equipment cost.
- Operator training. Manufacturer-provided or third-party operator training. Runs $1,500 to $25,000 depending on equipment complexity. OSHA-compliant training required on many categories.
- Extended warranty or service contract. Optional but common. Annual cost runs 5 to 15 percent of equipment price on production equipment, 1 to 3 percent on commercial vehicles. Financeable with the equipment.
- Equipment purchase price. Base equipment price as quoted by the dealer. Negotiable, especially on used equipment and end-of-quarter new equipment.
- Personal property tax (where applicable). Annual personal property tax assessed by counties in many states. Runs 0.5 to 3 percent of assessed value annually.
- Delivery and freight. Equipment delivery from dealer to operating site. Runs 1 to 5 percent of equipment price on standard equipment, higher on heavy or oversized equipment requiring permits and escorts.
- Software licenses. CAM, design, control, and operational software. Often subscription-based with annual renewal. Can run $5,000 to $50,000+ per seat depending on equipment category.
- Documentation and dealer fees. Lender doc fee runs $150 to $1,500. Dealer doc fee varies. Both may roll into financed amount or pay at signing.
What if something changes mid-term
Equipment loans run for 36 to 96 months. Things change. The patterns below cover the situations that come up most often during the loan term and how they typically resolve.
Borrower discovers equipment was misrepresented at sale
We funded based on the bill of sale, not the equipment condition. Disputes between buyer and seller after funding are between those parties. The loan obligation continues regardless. Independent pre-purchase inspection prevents most of these situations.
Business ownership change during loan term
Most equipment loans are personally guaranteed and assumable with our consent during ownership change. The new owner submits an application similar to the original; we review and either consent or require payoff.
Personal guarantee called on default
Personal guarantee makes the principal personally liable for the debt if the business defaults. Working with us on workout or restructure is the preferable path. Personal bankruptcy is a real consequence of unresolved default with personal guarantee.
Equipment used for something different from original purpose
Loan covenants sometimes restrict equipment use (no sub-rental, no out-of-state operation, etc.). Changing use materially without consent can trigger default. Request lender consent in writing before the change.
Authoritative sources
The rate ranges, structures, and program details on this page are informed by our internal financing book and the public industry resources below. We link out so you can verify any specific claim or go deeper.
